Ad
related to: moultrie 30 gal internal funnel mount system with digital pressureebay.com has been visited by 1M+ users in the past month
Search results
Results from the WOW.Com Content Network
A Marsh funnel is a Marsh cone with a particular orifice and a working volume of 1.5 litres. It consists of a cone 6 inches (152 mm) across and 12 inches in height (305 mm) to the apex of which is fixed a tube 2 inches (50.8 mm) long and 3/16 inch (4.76 mm) internal diameter. A 10-mesh screen is fixed near the top across half the cone. [2]
A Büchner funnel is a piece of laboratory equipment used in filtration. [1] It is traditionally made of porcelain , but glass and plastic funnels are also available. On top of the funnel-shaped part there is a cylinder with a fritted glass disc/perforated plate separating it from the funnel.
The funnel is then closed and shaken gently by inverting the funnel multiple times; if the two solutions are mixed together too vigorously emulsions will form. The funnel is then inverted and the stopcock carefully opened to release excess vapor pressure. The separating funnel is set aside to allow for the complete separation of the phases.
If a pump forces the liquid through a tube connected to a system consisting of a Venturi to increase the liquid speed (the diameter decreases), a short piece of tube with a small hole in it, and last a Venturi that decreases speed (so the pipe gets wider again), the gas will be sucked in through the small hole because of changes in pressure. At ...
A filter funnel is a laboratory funnel used for separating solids from liquids via the laboratory process of filtering. [1] In order to achieve this, a cone-like shaped piece of filter paper is usually folded into a cone and placed within the funnel. The suspension of solid and liquid is then poured through the funnel.
The flow resistance is defined, analogously to Ohm's law for electrical resistance, [2] as the ratio of applied pressure drop and resulting flow rate: = where is the applied pressure difference between two ends of the conduit, and the flow rate.
SS France (1960) (as SS Norway) and her distinctive wings, to increase uplift on the funnel's exhaust. The primary purpose of a ship's funnel(s) is to lift the exhaust gases clear of the deck, in order not to foul the ship's structure or decks, and to avoid impairing the ability of the crew to carry out their duties.
Gravity is usually measured in units of acceleration.In the SI system of units, the standard unit of acceleration is metres per second squared (m/s 2).Other units include the cgs gal (sometimes known as a galileo, in either case with symbol Gal), which equals 1 centimetre per second squared, and the g (g n), equal to 9.80665 m/s 2.
Ad
related to: moultrie 30 gal internal funnel mount system with digital pressureebay.com has been visited by 1M+ users in the past month