Search results
Results from the WOW.Com Content Network
For the Philippines it is rated at 85 PS (63 kW) at 3900 rpm and 185 N⋅m (136 lb⋅ft) at 2000 rpm and is used in the Euro2-rated Isuzu Crosswind, the local version of the Panther; and in India at 73.4 PS (54.0 kW) at 3900 rpm and 171 N⋅m (126 lb⋅ft) at 1800 rpm for the BS-3 (Euro3 equivalent) Chevrolet Tavera (another version of the ...
The 3.8-litre 6G75's output varied from 160 kW (218 PS; 215 hp) and 339 N⋅m (250 lb⋅ft) to 205 kW (279 PS; 275 hp) and 393 N⋅m (290 lb⋅ft) depending on application. In the interest of durability, the pistons were high-pressure castings attached to forged steel connecting rods that swing from a heat-treated forged steel crankshaft.
The Duratec 37 is a 3.7 L; 227.4 cu in (3,726 cc) version of the Cyclone V6 intended to power heavier or premium vehicles. The 3.7 L's additional displacement comes from an increase in bore diameter to 95.5 mm (3.76 in), stroke remains identical to the 3.5 L at 86.7 mm (3.41 in).
3.8. The 3.8 liter EGH engine in a 1993 Chrysler Imperial. The 3.3 was bored and stroked to 3.78 in × 3.43 in (96.01 mm × 87.12 mm) to create a 3.8 L; 230.5 cu in (3,778 cc) version. [1] This EGH version was also built at Trenton Engine in Trenton, MI. The 3.8 received an increase in power of 12 hp (9 kW), for a total of 162 hp (121 kW) in ...
Introduced with the 2015 Ford F-150 is a twin-turbo 2.7 L V6 EcoBoost engine. It delivers about 325 hp (242 kW) and 375 lb⋅ft (508 N⋅m). [71] The engine is built at the Lima Ford Engine Plant. [72] Ford has invested US$500 million in the Lima plant for the new engine.
The VR35DDTT was announced in March 2024 for the third-generation Infiniti QX80.It is also used in the related Nissan Patrol/Armada. [8] It is a larger version of the VR30DDTT and replaces the 5.6-liter VK56 V8 engine in Nissan's largest automobiles.
In 1948, Ford raised the compression of the flathead six or L-6 (designated H-series or Rouge 226) so that it generated 95 hp (71 kW) and 180 lb⋅ft (244 N⋅m) of torque. The G- and H-series engines were used in the full-sized Ford cars and trucks to replace the smaller 136 cu in (2.2 L) Flathead V8 that was used in the 1937 Ford. Ford ...
The 400-cubic-inch (6.6 L) was produced from 1967-1969. This engine has a bore and a stroke of 1968 Wildcat 430 CID engine. 4.04 in × 3.9 in (102.6 mm × 99.1 mm). It was the only large V8 engine available for the intermediate-sized A-body Buicks due to the GM cubic inch limit restriction in effect through 1970. [6]