Search results
Results from the WOW.Com Content Network
The Chrysler Slant-Six is the popular name for an overhead valve inline-6 engine produced by Chrysler Motors between 1959 and 2000. Featuring a reverse-flow cylinder head and cylinder bank inclined at a 30-degree angle from vertical, it was introduced in 170 cu in (2.8 L) and 225 cu in (3.7 L) displacements for the 1960 model year.
1919 Napier Lion II aircraft engine with three cylinder banks. Any design of motor/engine,be it a V or a boxer can be called an "in-line" if it's mounted in-line with the frame/chassis and in-line with the direction of travel of the vehicle.When the motor/engine is across the frame/chassis this is called a TRANSVERSE motor.Cylinder arrangement is not in the description of how the motor/engine ...
The 425.6 cubic inches (7.0 L) with a bore and stroke of 4.25 by 5 inches (108 mm × 127 mm) GMC inline six appeared in 1940s 4x4 Cab Over Engine (COE) trucks made in Pontiac, MI. Power ratings for 1955 were 190 HP @ 3200 rpm; torque 350 lb ft @ 1000 rpm. It also appeared in large GMC trucks in the 1950s ending in 1955.
A straight engine is easier to build than an equivalent flat engine or V engine, as it uses one cylinder head rather than two. Inline engines are also narrower than flat engines or V engines; however, they are longer and can be taller. The engine balance characteristics of a straight engine depend on the number of cylinders and the firing interval.
The Hemi-6 valves are angled apart (splayed) 18 degrees (included angle) along the crankshaft axis, and the intake valves are as large as 1.96 in (50 mm). The 6 intake and 6 exhaust valves open slightly towards each other and away from the cylinder wall, which results in less "shrouding" of the valves and greater airflow potential.
The inline six-cylinder 71 series engine was introduced as the initial flagship product of the Detroit Diesel Engine Division of General Motors in 1938.. This engine was in high demand during WWII, necessitating a dramatic increase in output: about 57,000 6-71s were used on American landing craft, including 19,000 on LCVPs, about 8,000 on LCM Mk 3, and about 9,000 in quads on LCIs; and 39,000 ...
A simple three-into-one exhaust for each cylinder bank provides uniform scavenging, since the engine is effectively behaving like two separate straight-three engines in this regard. Primary reciprocating plane and rotating plane imbalances are present due to the distance along the crankshaft between opposing cylinders.
A straight-four engine (also referred to as an inline-four engine) is a four-cylinder piston engine where cylinders are arranged in a line along a common crankshaft. The majority of automotive four-cylinder engines use a straight-four layout [ 1 ] : pp. 13–16 (with the exceptions of the flat-four engines produced by Subaru and Porsche) [ 2 ...