Search results
Results from the WOW.Com Content Network
Radar altimeters are frequently used by commercial aircraft for approach and landing, especially in low-visibility conditions (see instrument flight rules) and automatic landings, allowing the autopilot to know when to begin the flare maneuver. Radar altimeters give data to the autothrottle which is a part of the Flight Computer.
An altimeter or an altitude meter is an instrument used to measure the altitude of an object above a fixed level. [1] The measurement of altitude is called altimetry , which is related to the term bathymetry , the measurement of depth under water.
The greater the altitude, the lower the pressure. When a barometer is supplied with a nonlinear calibration so as to indicate altitude, the instrument is a type of altimeter called a pressure altimeter or barometric altimeter. A pressure altimeter is the altimeter found in most aircraft, and skydivers use wrist-mounted versions for similar ...
Pressure altimeters must be calibrated prior to flight to register the pressure as an altitude above sea level. The instrument case of the altimeter is airtight and has a vent to the static port. Inside the instrument, there is a sealed aneroid barometer. As pressure in the case decreases, the internal barometer expands, which is mechanically ...
The altimeter setting used is the ISA surface pressure of 1013 hPa or (29.92 inHg). The actual surface pressure may vary from this at different locations and times. Therefore, by using a standard pressure setting, every aircraft has the same altimeter setting, and vertical clearance can be maintained. [1] Scale comparison of some flight level ...
QFE - is the barometric altimeter setting that causes an altimeter to read zero when at the reference datum of a particular airfield (in practice, the reference datum is either an airfield center or a runway threshold). In ISA temperature conditions the altimeter will read the height above the airfield/runway in the vicinity of the airfield.
The Bendix Central Air Data Computer contains complex electromechanical mechanisms. Electrical-mechanical air data computers were developed in the early 1950s to provide a central source of airspeed, altitude, and other signals to avionic systems that needed this data.
Old altimeters were typically limited to displaying the altitude when set between 950 mb and 1030 mb. Standard pressure, the baseline used universally, is 1013.25 hectopascals (hPa), which is equivalent to 1013.25 mb or 29.92 inches of mercury (inHg). This setting is equivalent to the atmospheric pressure at mean sea level (MSL) in