Search results
Results from the WOW.Com Content Network
The weld must be 1/4 inch wide and have deep penetration into the metal. A proper weld is continuous, convex in shape and exhibits no porosity. [2] The underlying objective in manufacturing a diesel tank is to build it in such a way as to hold fuel for the life of the tank from the day it is installed.
As for the four-cylinder engines, the Dover and Dorset variations share a displacement. They can be distinguished by the Dover's higher specifications, with an aluminium rather than a pressed steel manifold, straight-cut gears, and larger ports in the head. The engine code is also different, 2711 for the Dorset and 2722E for the Dover. [2]
The 4JB1 is a 4-cylinder naturally aspirated watercooled in-line direct injection and also a high revving high output diesel engine with its VE rotary injection pump. Horse power is 90ps industrial version. torque is 135 lb.-ft. at 2000 rpm . while the light version 4JB1 uses gear type oil pump and Bosch "A" Type mechanical injection.
In North America, gas stations offer two types of diesel fuel – according to ASTM D975 [5] these are named No. 1 and No. 2 fuel. No. 1 fuel (similar to kerosene) has a natural CFPP of -40 °C but it is more expensive than No. 2 fuel. Adding No. 1 fuel will lower the CFPP of No. 2 fuel – adding 10% will lower the CFPP temperature by about 5 ...
Cylinder bore: 115 mm (4.53 in) Piston stroke: 125 mm (4.92 in) Cylinder block material: Cast iron: Cylinder head material: Cast iron: Valvetrain: SOHC 4 valves × cyl. Compression ratio: 17.5:1, 17.0:1 for 300 hp (224 kW) Combustion; Turbocharger: With intercooler: Fuel system: High-pressure common-rail direct injection: Fuel type: Diesel ...
Due to the higher density, diesel fuel offers a higher volumetric energy density: the density of EN 590 diesel fuel is defined as 0.820 to 0.845 kg/L (6.84 to 7.05 lb/US gal) at 15 °C (59 °F), about 9.0-13.9% more than EN 228 gasoline (petrol)'s 0.720–0.775 kg/L (6.01–6.47 lb/US gal) at 15 °C, which should be put into consideration when ...
Over a period of time, Detroit Diesel continued to further evolve the design of the engine. They finally brought the engine up to 137.5 hp (102.5 kW) per cylinder and 406 lb⋅ft (550 N⋅m) torque per cylinder; needless to say, this is a considerable amount of power coming from 149 cu in (2.4 L) per cylinder.
The EMD 567 is a line of large medium-speed diesel engines built by General Motors' Electro-Motive Division.This engine, which succeeded Winton's 201A, was used in EMD's locomotives from 1938 until its replacement in 1966 by the EMD 645.