Search results
Results from the WOW.Com Content Network
FTDI US232R : USB to RS-232 cable. A USB-to-serial adapter or simply USB adapter is a type of protocol converter that is used for converting USB data signals to and from serial communications standards (serial ports). Most commonly the USB data signals are converted to either RS-232, RS-485, RS-422, or TTL-level UART serial data.
The most common usage is the DB25, using TASCAM's pinout (now standardised in AES59 by the Audio Engineering Society [1]). To avoid the possibility of bent pins on fixed equipment, the male connector is generally fitted to the cabling and the female connector to the equipment. The DD50 connector usage is described in AES-2id. [2]
Ugreen (绿联) is a Chinese consumer electronics brand owned by Ugreen Group Ltd and based in Shenzhen, Guangdong. [2] [3] The brand and company was established by Zhang Qingsen in 2012, and specialises in USB hardware such as cables and AC adapters, as well as other categories of consumer electronics such as audio equipment and mobile accessories.
A converter from USB to an RS-232 compatible serial port—more than a physical transition, it requires a driver in the host system software and a built-in processor to emulate the functions of the IBM XT compatible serial port hardware.
Normal density of DA, DB, DC, DD, and DE sized connectors. The D-subminiature or D-sub is a common type of electrical connector.They are named for their characteristic D-shaped metal shield.
The written USB 3.0 specification was released by Intel and its partners in August 2008. The first USB 3.0 controller chips were sampled by NEC in May 2009, [4] and the first products using the USB 3.0 specification arrived in January 2010. [5] USB 3.0 connectors are generally backward compatible, but include new wiring and full-duplex operation.
Smaller machines have less room for large parallel port connectors. USB-to-parallel adapters are available that can make parallel-only printers work with USB-only systems. There are PCI (and PCI-express) cards that provide parallel ports. There are also some print servers that provide an interface to parallel ports through a network. USB-to-EPP ...
An IEEE 1284 36-pin female on a circuit board. In the 1970s, Centronics developed the now-familiar printer parallel port that soon became a de facto standard.Centronics had introduced the first successful low-cost seven-wire print head [citation needed], which used a series of solenoids to pull the individual metal pins to strike a ribbon and the paper.