Search results
Results from the WOW.Com Content Network
It is not asserted until the modem either makes an outgoing call, or answers an incoming call, and then connects with a data modem on the other end. The signal is asserted at the same time the modem reports its CONNECT message, and stays asserted until the call is disconnected (either intentionally or because of a fault in the line). DCD is ...
An example handshake of a dial-up modem. Modern dial-up modems typically have a maximum theoretical transfer speed of 56 kbit/s (using the V.90 or V.92 protocol), although in most cases, 40–50 kbit/s is the norm. Factors such as phone line noise as well as the quality of the modem itself play a large part in determining connection speeds.
Wi-Fi over Coax is a technology for extending and distributing Wi-Fi signals via coaxial cables. As an in-building wireless solution, Wi-Fi over Coax can make use of existing or new cabling with native impedance of 50 Ω shared by a Wi-Fi access point , cabling run, and antenna.
Unplug all phone devices in your home - Unplug all phone devices in your home, then reconnect just the modem. Try to connect online, and if it works, plug in each device one at a time until you find the one causing the problem. Restart your computer and modem - Sometimes the old "turn it off and on again" approach actually does work! Just wait ...
USB broadband modems. A mobile broadband modem, also known as wireless modem or cellular modem, is a type of modem that allows a personal computer or a router to receive wireless Internet access via a mobile broadband connection instead of using telephone or cable television lines.
Tethering over Wi-Fi, also known as Personal Hotspot, is available on iOS starting with iOS 4.2.5 (or later) on iPhone 4 or iPad (3rd gen), certain Windows Mobile 6.5 devices like the HTC HD2, Windows Phone 7, 8 and 8.1 devices (varies by manufacturer and model), and certain Android phones (varies widely depending on carrier, manufacturer, and ...
Because it was possible for an ISP to obtain a direct digital connection to a telco, a digital modem – one that connects directly to a digital telephone network interface, such as T1 or PRI – could send a signal that utilized every bit of bandwidth available in the system. While that signal still had to be converted back to analog at the ...
DECT 6.0 (1.9 GHz), 5.8 GHz or 900 MHz phones, commonly available today, do not use the 2.4 GHz band and thus do not interfere. VoIP/Wi-Fi phones share the Wi-Fi base stations and participate in the Wi-Fi contention protocols. Several different Wi-Fi channels are available and it is possible to avoid the phone channels.