Search results
Results from the WOW.Com Content Network
The old standard North American passenger railcar is 10 ft 6 in (3.20 m) wide by 14 ft 6 in (4.42 m) high and measures 85 ft 0 in (25.91 m) over coupler pulling faces with 59 ft 6 in (18.14 m) truck centers, or 86 ft 0 in (26.21 m) over coupler pulling faces with 60 ft 0 in (18.29 m) truck centers.
This does not include light rail systems that follow the BOStrab standard, with newer metro lines to use low-floor trams which have a usual floor height of 300 to 350 mm (11.8 to 13.8 in) so that platforms are constructed as low as 300 mm in accordance with BOStrab that requires the platform height not to be higher than the floor height. [20]
[6] In South Africa and the southern region of Africa, the minimum vertical clearance of modern bridges is 5 metres (16 ft 5 in), although the legal height limit of road vehicles is still at 4.3 metres (14 ft 1 in). [7] United Kingdoms has a standard on minimum clearance of a public highway at 16 feet 6 inches (5.03 m).
One review of tall buildings suggests that residential towers may have 3.1 m (10 ft 2 in) floor height for apartments, while a commercial building may have floor height of 3.9 m (12 ft 9.5 in) for the storeys leased to tenants. In such tall buildings (60 or more storeys), there may be utility floors of greater height. [7]
An Interstate Highway under construction , with both directions of traffic moved to one side of the roadway I-94 in Michigan, showing examples of non-interchange overpass signage in median, upcoming exit signage on right shoulder, a pre-1960 overpass with height restriction signage, newly installed cable median barrier, and parallel grooved ...
A floor plan is not a top view or bird's-eye view; it is a measured drawing to scale of the layout of a floor in a building. A top view or bird's-eye view does not show an orthogonally projected plane cut at the typical four foot height above the floor level. A floor plan may show any of the following elements: [3] interior walls and hallways ...
Space between the structural ceiling and the dropped ceiling or under a raised floor is typically considered plenum; however, some drop-ceiling designs create a tight seal that does not allow for airflow and therefore may not be considered a plenum air-handling space. [1] [2]
the floor of 1.4 is 1, the ceiling of 1.4 is 2. 1.6 rounded is 2, the floor of 1.6 is 1, the ceiling of 1.6 is 2. So the floor of a fraction is always down; the ceiling of a fraction is always up; rounding can be up or down depending upon whether the fraction is less