Search results
Results from the WOW.Com Content Network
The density can be calculated by dividing the grammage of paper (in grams per square metre or "gsm") by its caliper (usually in micrometres, occasionally in mils). [1] The "ISO 534:2011, Paper and board — Determination of thickness, density and specific volume" indicates that the paper density is expressed in grams per cubic centimeter (g/cm ...
Set-off is measured at two different time intervals, 0.35s and 3s. A freshly printed surface is pressed against a paper after 0.35s and after 3s. Then the set-off density is measured. The idea behind selecting these two timings is to know what will be the set-off when the materials are used in a high-speed press and a low-speed press.
Grammage and basis weight, in the pulp and paper industry, are the area density of a paper product, that is, its mass per unit of area. Two ways of expressing the area density of a paper product are commonly used: Expressed in grams (g) per square metre (g/m 2), regardless of its thickness [1] (known as grammage). This is the measure used in ...
In the US, paper density is usually measured in "pound per reams" (of 500 sheets). Typical Letter paper has a basis weight of paper of 20 or 24 pounds (9.1 or 10.9 kg) – the weight of 500 sheets (a ream) of 17-by-22-inch (431.8 by 558.8 mm) paper at 70 °F (21 °C) and at 50% humidity. [ 3 ]
Similarly, two sheets of A4 can be scaled down to fit one A4 sheet without excess empty paper. This system also simplifies calculating the weight of paper. Under ISO 536, paper's grammage is defined as a sheet's mass in grams (g) per area in square metres (unit symbol g/m 2; the nonstandard abbreviation "gsm" is also used). [5]
The telephone cables have a large number of conductors that are individually insulated. The paper needs to be thin (30-40 g/m 2). A normal power cable needs more insulation and therefore paper with higher paper density is used, normally 60-190 g/m 2. The paper needs to be strong, elastic, uniform and free of holes or debris.
Plot of Young's modulus vs density with log-log scaling. The colors represent families of materials. The first plot on the right shows density and Young's modulus, in a linear scale. The second plot shows the same materials attributes in a log-log scale. Materials families (polymers, foams, metals, etc.) are identified by colors.
Machine-finished coated paper (MFC) has a basis weight of 48–80 g/m 2. They have good surface properties, high print gloss and adequate sheet stiffness. MFC papers are made of 60–85% groundwood or thermomechanical pulp (TMP) and 15–40% chemical pulp with a total pigment content of 20–30%. The paper can be soft nip calendered or ...