Search results
Results from the WOW.Com Content Network
Solenoid valves. A solenoid valve is an electromechanically operated valve.. Solenoid valves differ in the characteristics of the electric current they use, the strength of the magnetic field they generate, the mechanism they use to regulate the fluid, and the type and characteristics of fluid they control.
The rotary solenoid is an electromechanical device used to rotate a ratcheting mechanism when power is applied. These were used in the 1950s for rotary snap-switch automation in electromechanical controls. Repeated actuation of the rotary solenoid advances the snap-switch forward one position.
How it works "The MultiAir system is elegantly simple. An electrohydraulic actuator, a high-response, electronically activated solenoid—controls the pressure applied to hydraulic fluid (engine oil drawn from the sump) that fills a thin passageway that connects the intake valves and the camshaft.
[3] [4] Honda's CVCC Stratified charge engine approach also used a small third valve, but sent a richer air/fuel mixture to a small pre-combustion chamber near the spark plug, to help ignite a leaner air/fuel mixture in the main combustion chamber. MCA-Jet was a simpler system that sent the same air/fuel mixture to all intake and MCA-Jet valves.
Two-stroke engines which use crankcase compression do not require a crankcase ventilation system, since all of the gases within the crankcase are then fed into the combustion chamber. Many small four-stroke engines such as lawn mower engines and electricity generators simply use a draught tube connected to the intake system.
Solenoid valves are used to control valve activation that is electronically operated. These are used for controlling liquid or gas flow and are most commonly used in fluidics as control elements. They are multifunctional in a way to release, shut off, mix, or distribute fluids with high reliability and fast processing.
The controlled part of the injector is a solenoid-operated spill valve. Normally, it is open, allowing the fuel to return to the supply line when the pump plunger descends. When the solenoid is energized, the spill valve closes, and the fuel is forced through the spray tip into the cylinder. The four phases of EUI operation are: Fill phase
For other vehicles, he and another source said that periodic use of a concentrated engine cleaner every 100,000 miles will "often" clean out carbon buildup. [25] However, journalist and automotive mechanics instructor Jim Kerr says that with some brands of gasoline, deposits can build up on intake valves in less than 10,000 kilometers (6200 ...