Ad
related to: radar beam width calculation sheet
Search results
Results from the WOW.Com Content Network
Dwell time (T D) in surveillance radar is the time that an antenna beam spends on a target. [1] The dwell time of a 2D–search radar depends predominantly on the antenna's horizontal beam width θ AZ, and; the turn speed n of the antenna (in rotations per minute or rpm, i.e. 360 degrees in 60 seconds = multiplied by a factor of 6).
Radar cross-section (RCS), denoted σ, also called radar signature, is a measure of how detectable an object is by radar. A larger RCS indicates that an object is more easily detected. [1] An object reflects a limited amount of radar energy back to the source. The factors that influence this include: [1] the material with which the target is made;
For example, consider a radar with a beam width of one degree and an antenna that rotates once every ten seconds, or 36 degrees per second. An object will be painted by the beam for only 1/36 of a second as the one-degree beam sweeps over it. If the radar has a PRF of 500, the object will be painted with 14 pulses per scan at most.
Given an example antenna that generates a beam of 2 degrees width – fairly typical – a conical scanning radar might move the beam 1.5 degrees to one side of the centerline by offsetting the feed slightly. The resulting pattern, at any one instant in time, covers the midline of the antenna for about 0.5 degrees, and 1.5 degrees to the side.
The resolution of any radar depends on the width of the beam and the range to the target. For example; a radar with 1 degree beam width and a target at 120 km (75 mi) range will show the target as 2 km (1.2 mi) wide. To produce a 1-degree beam at the most common frequencies, an antenna 1.5 kilometres (0.93 miles) wide is required.
Diagram of AN/SPY-3 vertical electronic pencil beam radar conex projections. X band functionality (8 to 12 GHz frequency range) is optimal for minimizing low-altitude propagation effects, narrow beam width for best tracking accuracy, wide frequency bandwidth for effective target discrimination, and the target illumination for SM-2 and Evolved Sea Sparrow Missiles (ESSM).
Radar engineering is the design of technical aspects pertaining to the components of a radar and their ability to detect the return energy from moving scatterers — determining an object's position or obstruction in the environment.
A simple calculation reveals that a radar echo will take approximately 10.8 μs to return from a target 1 statute mile away (counting from the leading edge of the transmitter pulse (T 0), (sometimes known as transmitter main bang)). For convenience, these figures may also be expressed as 1 nautical mile in 12.4 μs or 1 kilometre in 6.7 μs.
Ad
related to: radar beam width calculation sheet