Search results
Results from the WOW.Com Content Network
The auto ignition point of blast furnace gas is approximate 630–650 °C (1,166–1,202 °F) and it has a lower explosive limit (LEL) of 27% and an upper explosive limit (UEL) of 75% in an air-gas mixture at normal temperature and pressure.
The hot blast temperature can be from 900 to 1,300 °C (1,650 to 2,370 °F) depending on the stove design and condition. ... natural gas) use in blast furnaces is a ...
James Beaumont Neilson, previously foreman at Glasgow gas works, invented the system of preheating the blast for a furnace.He found that by increasing the temperature of the incoming air to 149 °C (300 °F), he could reduce the fuel consumption from 8.06 tons of coal to 5.16 tons of coal per ton of produced iron with further reductions at even higher temperatures. [4]
The hot blast pumps hot air into the blast furnace. The hot blast temperature ranges from 900 to 1,300 °C (1,650 to 2,370 °F) depending on the design and condition. Oil, tar , natural gas, powdered coal and oxygen can be injected to combine with the coke to release additional energy and increase the percentage of reducing gases present ...
For blast furnaces, direct reduction corresponds to the reduction of oxides by the carbon in the coke. However, in practice, direct reduction only plays a significant role in the final stage of iron reduction in a blast furnace, by helping to reduce wustite (FeO) to iron. In this case, the chemical reaction can be trivially described as follows ...
Low-temperature furnaces, unable to reach the melting temperatures of iron alloys, produce a bloom, ... Gas production (GJ/t) 3,25 (blast furnace gas) 0 10,9
The four giant gas stoves which heated the furnace are set to be demolished next month. ... The blast furnace was first mothballed in 2010 but restarted two years later when SSI UK took over.
Coking is the process of heating coal in the absence of oxygen to a temperature above 600 °C (1,112 °F) to drive off the volatile components of the raw coal, leaving behind a hard, strong, porous material with a high carbon content called coke.