enow.com Web Search

  1. Ads

    related to: 4 inch french drain pipe

Search results

  1. Results from the WOW.Com Content Network
  2. This Drain Mistake Could Be Costly - AOL

    www.aol.com/drain-mistake-could-costly-205600754...

    A French drain is a trench that diverts water away from an area where it's pooling to a lower elevation where it can be released, explains Mike Arnold, director of The Gardens at Texas A&M ...

  3. French drain - Wikipedia

    en.wikipedia.org/wiki/French_drain

    A diagram of a traditional French drain. A French drain [1] (also known by other names including trench drain, blind drain, [1] rubble drain, [1] and rock drain [1]) is a trench filled with gravel or rock, or both, with or without a perforated pipe that redirects surface water and groundwater away from an area.

  4. Rain gutter - Wikipedia

    en.wikipedia.org/wiki/Rain_gutter

    A 4-metre gutter, enduring a −5 °C to 25 °C temperature range will need space to expand, 30 × 4 × 0.06 = 7.2 mm within its end stops. [28] As a rule of thumb a 4-inch (100 mm) gutter with a single 68-millimetre (2.7 in) downpipe will drain a 600-square-foot (56 m 2 ) roof.

  5. Trench drain - Wikipedia

    en.wikipedia.org/wiki/Trench_drain

    Channels can range from 1 inch (2.5 cm) to 2 feet (61 cm) in width, while depths can reach up to 4 feet (120 cm). Trench drains are commonly confused with French drains , which consist of a perforated pipe that is buried in a gravel bed, and which are used to evacuate ground water.

  6. Nominal Pipe Size - Wikipedia

    en.wikipedia.org/wiki/Nominal_Pipe_Size

    Nominal Pipe Size (NPS) is a North American set of standard sizes for pipes used for high or low pressures and temperatures. [1] " Nominal" refers to pipe in non-specific terms and identifies the diameter of the hole with a non-dimensional number (for example – 2-inch nominal steel pipe" consists of many varieties of steel pipe with the only criterion being a 2.375-inch (60.3 mm) outside ...

  7. Fixture unit - Wikipedia

    en.wikipedia.org/wiki/Fixture_unit

    A Fixture Unit is not a flow rate unit but a design factor. A fixture unit is equal to 1 cubic foot (0.028 m 3) of water drained in a 1 + 1 ⁄ 4 inches (32 mm) diameter pipe over one minute. [2] One cubic foot of water is roughly 7.48 US gallons (28.3 L; 6.23 imp gal). A Fixture Unit is used in plumbing design for both water supply and waste ...

  1. Ads

    related to: 4 inch french drain pipe