Search results
Results from the WOW.Com Content Network
In the United States, the standard drink contains 0.6 US fluid ounces (18 ml) of alcohol. This is approximately the amount of alcohol in a 12-US-fluid-ounce (350 ml) glass of beer, a 5-US-fluid-ounce (150 ml) glass of wine, or a 1.5-US-fluid-ounce (44 ml) glass of a 40% ABV (80 US proof) spirit.
[1] [2] [3] It is defined as the number of millilitres (mL) of pure ethanol present in 100 mL (3.5 imp fl oz; 3.4 US fl oz) of solution at 20 °C (68 °F). The number of millilitres of pure ethanol is the mass of the ethanol divided by its density at 20 °C (68 °F), which is 0.78945 g/mL (0.82353 oz/US fl oz; 0.79122 oz/imp fl oz; 0.45633 oz ...
A "medium" glass (175 ml (5.9 US fl oz) of 12% ABV wine contains around 2.1 units of alcohol. However, British pubs and restaurants often supply larger quantities (large glass ≈ 250 ml (8.5 US fl oz)), which contain 3 units. Red wines often have a higher alcohol content (on average 12.5%, sometimes up to 16%).
To calculate a percentage of a percentage, convert both percentages to fractions of 100, or to decimals, and multiply them. For example, 50% of 40% is: 50 / 100 × 40 / 100 = 0.50 × 0.40 = 0.20 = 20 / 100 = 20%. It is not correct to divide by 100 and use the percent sign at the same time; it would literally imply ...
Both the 42-US-gallon (159 L) barrels (based on the old English wine measure), the tierce (159 litres) and the 40-US-gallon (150 L) whiskey barrels were used. Also, 45-US-gallon (170 L) barrels were in common use. The 40 gallon whiskey barrel was the most common size used by early oil producers, since they were readily available at the time.
The table shown on the right can be used in a two-sample t-test to estimate the sample sizes of an experimental group and a control group that are of equal size, that is, the total number of individuals in the trial is twice that of the number given, and the desired significance level is 0.05. [4]
Occupancy and other was 27.6%, 30 basis points lower year over year or 40 basis points lower on a comparable basis. This came from cost optimizations such as utility savings and simplified operations.
That is, all firms have an equal market share. Low concentration – 40% A concentration ratio of close to 0% implies perfect competition at the least. This is only possible in an industry where there is a very large number of firms. Medium concentration 40% – 70% An industry in this range is likely an oligopoly. An oligopoly describes a ...