Search results
Results from the WOW.Com Content Network
12-cylinder engine used in the Isuzu New Power from February 1976 to August 1983. 115 mm (4.5 in) 120 mm (4.7 in) 14,957 cc (14.957 L; 912.7 cu in) 350 PS (257 kW) 385 PS (283 kW) 12PB1 12-cylinder engine used in the Isuzu New Power from December 1979 to August 1983. 115 mm (4.5 in) 135 mm (5.3 in)
Many parts from the newer 22R/R-E are not compatible with those from the older pre-1985 engine. Non-compatible parts include the cylinder head, block, pistons and many of the associated parts such as the timing chain and cover, and water and oil pumps (although the oil pump internals are the same).
Wet liner cylinder blocks use cylinder walls that are entirely removable and fit into the block using special gaskets. They are called "wet liners" because their outer sides come in direct contact with the engine's coolant. In other words, the liner is the entire cylinder wall, rather than merely a sleeve.
The 2.0-liter I4 EcoBoost engines were produced at the Ford Valencia Plant in Spain in 2009. [12] The 1.6-liter I4 EcoBoost engines are assembled at the Ford Bridgend Engine Plant in the United Kingdom. [13] The smaller 1000cc-displacement 3 cylinder EcoBoost engine is produced both at Ford Germany in Cologne and at Ford Romania in Craiova. [12]
The 1964 Buick iron-block 4.9 L (300 cu in) engine had aluminium cylinder heads, 3.75 bore and a longer 3.4" stroke crankshaft, which with modification can be used with the Buick 215 or Rover engine blocks to produce a high-output, very light weight V8 with displacement of up to about 4.9 L (300 cu in). The 300 crank, after machining the mains ...
For Japan in 1983, the G10 was rated at a much higher 60 PS (59 BHP) at 5500 RPM and 8.5 kg-m (61 lb·ft) of torque, while the Japanese G10T made 80 PS (59 kW) at 5500 rpm and 12.0 kg·m (87 lb·ft) of torque at 3500 rpm. [4] Meanwhile, for North America, the standard G10 was rated for the 48 horsepower at 5100 RPM and 57 lb·ft at 3200 RPM.
It was designed from scratch with five main crankshaft bearings and four valves per cylinder and can be either SOHC or DOHC and one timing belt. The fifth digit is the only way to tell without seeing the engine. Subaru EJ20G twin turbo. EJ15: 1483.4 cc SOHC, 1990–2003 JDM Subaru Impreza; EJ16: 90 hp at 5,600 rpm used in the 1993–2006 Subaru ...
The 2.5 L; 151.8 cu in (2,488 cc) L5 4-cylinder engine has an 89 mm (3.50 in) bore and a 100 mm (3.94 in) stroke, with a compression ratio of 9.7:1. The standard crankshaft is cast iron with eight counterweights. To increase durability of the bore, Mazda uses cast iron for the cylinder liners.