Search results
Results from the WOW.Com Content Network
DIN 3017-3: Hose clamps – Part 3: Bolt clamps, DIN 3017-4: Hose clamps – Part 4: Technical delivery conditions, DIN 3017-5: Hose clamps – Part 5: Wide strip hose clamps with fastening lugs; Types D and E, DIN 3113: Combination Wrench, DIN 3770: Sealing rings ("O-rings") with special accuracy, made of elastomeric materials: Withdrawn: DIN ...
The width of devices that are mounted on a 35 mm "top hat" DIN rail generally use "modules" as a width unit, one module being 18 mm wide. For example, a small device (e.g. a circuit breaker) may have a width of 1 module (18 mm wide), while a larger device may have a width of 4 modules (4 × 18 mm = 72 mm).
Five-pin male 180° DIN connector from a 1988 Schneider MF2 keyboard by Cherry. The DIN connector is an electrical signal connector that was standardized by the Deutsches Institut für Normung (DIN), the German Institute for Standards, in the mid 1950s, initially with 3 pins for mono, but when stereo connections and gear appeared in late 1950s (1959 or so), versions with 5 pins or more were ...
A double DIN 1.6/5.6 bulkhead jack connector, crimp type, for 75 Ω coaxial cable A Type N connector (male), right-angled solder-type for semi-rigid coaxial cable with a diameter of 0.141-inch. 4.1-9.5 connector, standardized as DIN 47231 (in 1974) and IEC 60169-11 (in 1977) 4.3-10 connector, formerly known as DIN 4.3/10, now standardized as ...
A diagram of the 3 pin DIN connector. File usage. The following page uses this file: DIN connector; Global file usage. The following other wikis use this file:
E DIN # is a draft standard and DIN V # is a preliminary standard. DIN EN # is used for the German edition of European standards. DIN ISO # is used for the German edition of ISO standards. DIN EN ISO # is used if the standard has also been adopted as a European standard., Some of the DIN standards date back to the time of Nazi Germany.
The 4.3-10 connector (sometimes referred to as 4.3/10) is a 50 Ω multi-purpose RF connector used to connect coaxial cables with other cables or RF devices, such as transmitters or antennas. The IEC standard 61169-54 specifies an inner diameter of the outer conductor is 10 mm and the outer diameter of the inner conductor is 4.3 mm.
Mini-DIN-3 connectors were used in early implementations of Apple LocalTalk. Mini-DIN-4 connectors are used for S-video , and were used for Apple Desktop Bus . Mini-DIN-6 connectors were used for IBM PC compatible PS/2 keyboard and mouse ports and for Acorn Archimedes keyboards (prior to the A7000, these were proprietary, while A7000 and later ...