Search results
Results from the WOW.Com Content Network
The inner contact on the 7-16 DIN connector measures 7 mm in outer diameter while the outer contact on the connector measures 16 mm. in inner diameter [3] DIN is an acronym for the Deutsches Institut für Normung, the standards organization that harmonized the standard for the connector. (Previously the 7-16 had been developed as a military ...
Example (inch, coarse): For size 7 ⁄ 16 (this is the diameter of the intended screw in fraction form)-14 (this is the number of threads per inch; 14 is considered coarse), 0.437 in × 0.85 = 0.371 in. Therefore, a size 7 ⁄ 16 screw (7 ⁄ 16 ≈ 0.437) with 14 threads per inch (coarse) needs a tap drill with a diameter of about 0.371 inches.
The lightweight 16-in/50 Mark 7 was designed to resolve this conflict. These guns were 50 calibers long, 50 times their 16-inch (406 mm) bore diameter with barrels 66.7 ft (20.3 m) long, from chamber to muzzle. Each gun weighed about 239,000 lb (108 t) without the breech, and 267,900 lb (121.5 t) with the breech. [1]
Thus, the outer diameter of a catheter in millimeters can be calculated by dividing the French size by 3. [2] For example, a catheter with a French size of 9 would have an outer diameter of approximately 3 mm. While the French scale aligns closely with the metric system, it introduces redundancy and the potential for rounding errors.
A 12-gauge shotgun, nominally 18.5 mm (0.73 in), can range from a tight 18 mm (0.71 in) to an extreme overbore of 20 mm (0.79 in). Some also claim an increased velocity with the overbored barrels, up to 15 m/s (49 ft/s), which is due to the larger swept volume of the overbored barrel.
54 mm figure scale toy soldiers are supposed to use this scale as well. Same as Gauge 1, cars, common for slot cars. Commonly referred to as Stablemate size in model horses. 1:30.5: 10 mm Often quoted as the alternative to 1:32 scale. 1:30: 0.4 in: 10.16 mm Toy soldiers and military vehicles including King & Country and Figarti. 1:29: 10.51 mm
So a 1 / 2 in (12.7 mm) diameter drill will be able to drill a hole 4 + 1 / 2 in (114.3 mm) deep, since it is 9 times the diameter in length. A 1 / 8 in (3.175 mm) diameter drill can drill a hole 1 + 5 / 8 in (41.275 mm) deep, since it is 13 times the diameter in flute length.
900 mm: 2 ft 11 + 7 ⁄ 16 in: See 900 mm gauge railways: 914 mm: 3 ft: See 3 ft gauge railways 3 ft gauge railways in the United Kingdom: 925 mm: 3 ft 13 ⁄ 32 in: Germany Trams in Chemnitz, since in 1914 943 mm: 3 ft 1 + 1 ⁄ 8 in: England Central Electricity Generating Board Fawley Tunnel [75] 946 mm: 3 ft 1 + 1 ⁄ 4 in: Austria