Search results
Results from the WOW.Com Content Network
This battery contained two independent 4.5 V batteries, and had a four-pin connector. 9 V with a center tap was available by wiring in series. There were two ⌀3.2 mm negative pins spaced 9.5 mm apart and two ⌀4.0 mm positive pins spaced 14.3 mm apart.
= 8.4 6 × 10 −5 m/s 2: foot per minute per second: fpm/s ≡ 1 ft/(min⋅s) = 5.08 × 10 −3 m/s 2: foot per second squared: fps 2: ≡ 1 ft/s 2 = 3.048 × 10 −1 m/s 2: gal; galileo: Gal ≡ 1 cm/s 2 = 10 −2 m/s 2: inch per minute per second: ipm/s ≡ 1 in/(min⋅s) = 4.2 3 × 10 −4 m/s 2: inch per second squared: ips 2: ≡ 1 in/s 2 ...
2.7: 3.8: battery, Lithium-ion nanowire: 2.54: 95% [clarification needed] [13] battery, Lithium Thionyl Chloride (LiSOCl2) [14] 2.5: Water 220.64 bar, 373.8 °C [citation needed] [clarification needed] 1.968: 0.708: Kinetic energy penetrator [clarification needed] 1.9: 30: battery, Lithium–Sulfur [15] 1.80 [16] 1.26: battery, Fluoride-ion ...
The numbers in the code correlate with the battery dimensions. For batteries with dimensions of < 100 mm the (truncated) diameter in millimetres, followed by the height in tenths of a millimetre; for batteries with a single dimension ≥ 100 mm the diameter in millimetres, then a slash (/) followed by the height in millimetres.
The factor–label method can convert only unit quantities for which the units are in a linear relationship intersecting at 0 (ratio scale in Stevens's typology). Most conversions fit this paradigm. An example for which it cannot be used is the conversion between the Celsius scale and the Kelvin scale (or the Fahrenheit scale). Between degrees ...
100% SOC by mass by volume; year V V V MJ/kg (Wh/kg) MJ/L (Wh/L) W/kg Wh/$ ($/kWh) % %/month years Lead–acid: SLA VRLA PbAc Lead: H 2 SO 4: Lead dioxide: Yes 1881 [1] 1.75 [2] 2.1 [2] 2.23–2.32 [2] 0.11–0.14 (30–40) [2] 0.22–0.27 (60–75) [2] 180 [2] 5.44–13.99 (72–184) [2] 50–92 [2] 3–20 [2] Zinc–carbon: Carbon–zinc Zinc ...
On such a chart the values of specific energy (in W·h/kg) are plotted versus specific power (in W/kg). Both axes are logarithmic , which allows comparing performance of very different devices. Ragone plots can reveal information about gravimetric energy density, but do not convey details about volumetric energy density .
Converts measurements to other units. Template parameters [Edit template data] This template prefers inline formatting of parameters. Parameter Description Type Status Value 1 The value to convert. Number required From unit 2 The unit for the provided value. Suggested values km2 m2 cm2 mm2 ha sqmi acre sqyd sqft sqin km m cm mm mi yd ft in kg g mg lb oz m/s km/h mph K C F m3 cm3 mm3 L mL cuft ...