Search results
Results from the WOW.Com Content Network
The .308 Winchester has a 3.64 mL (56 gr H 2 O) cartridge case capacity. [9] The exterior shape of the case was designed to promote reliable case feeding and extraction in bolt-action rifles and machine guns alike, under extreme conditions. .308 Winchester maximum C.I.P. cartridge dimensions. All dimensions in millimeters (mm) and inches.
The .308 Marlin Express is a cartridge developed in 2007 by Marlin Firearms and Hornady. It is based on the .307 Winchester with a goal to duplicate .308 Winchester performance. The cartridge uses a slightly shorter, semi-rimmed case similar to that of the .220 Swift to function in lever-action rifles.
Muzzle velocity was surmised from the distance the projectile traveled. [8] In the 1800s test barrels began to be instrumented. [9] Holes were drilled in the barrel and fitted with standardized steel pistons which exerted pressure which compressed standardized copper cylinders when the firearm discharged.
So, the muzzle velocity of a 2-inch (51 mm) barrel is less than that of a 4-inch (100 mm) barrel, which is less than that of a 6-inch (150 mm) barrel. Large naval guns will have high length-to-diameter ratios, ranging between 38:1 to 50:1. This length ratio maximizes the projectile velocity.
The initial testing was done in 2008 and tested the velocity of 13 common handgun cartridges as it related to firearm barrel length. In 2009 an additional three calibers were tested and in 2010 and 2011 more calibers were added. Also in 2011 testing was carried out to study the "cylinder gap effect" on the velocity of ammunition shot from ...
The .308 Norma Magnum (7.62×65mmBR) cartridge was created by Nils Kvale at Norma, Sweden. Like the larger .358 Norma Magnum it is based on a shortened 300 H&H magnum. [1] [2] It very closely resembled the wildcat .30-338 Magnum cartridge. [3] [2] Kvale designed a wildcat cartridge, the 8mm Kvale, in 1949.
The piezo measuring device (transducer) is positioned at a distance of 25 millimetres (0.98 in) from the breech face when the length of the cartridge case permits that, including limits. When the length of the cartridge case is too short, pressure measurement will take place at a chambering specific defined shorter distance from the breech face ...
Miller twist rule is a mathematical formula derived by American physical chemist and historian of science Donald G. Miller (1927-2012) to determine the rate of twist to apply to a given bullet to provide optimum stability using a rifled barrel. [1]