Search results
Results from the WOW.Com Content Network
Adhesive removers are often based on organic solvents, which can dissolve or soften many adhesive polymers that do not dissolve in water. They may also contain a gelling agent, increasing viscosity so that the product sticks to the area to be treated rather than running off. Common solvents used include D-limonene, aliphatic alkanes, and acetone.
Thread seal tape is appropriate for use on tapered threads, where the sealing force is a wedge action. Parallel threads may not seal effectively with or without tape, as they are intended to be sealed by a gasket. Thread seal tape is almost always applied by hand, although at least one machine is available for the production wrapping of fittings.
A bottle of Loctite thread-locking fluid Bolts with thread-locking fluid applied. Thread-locking fluid or threadlocker is a single-component adhesive, applied to the threads of fasteners such as screws and bolts to prevent loosening, leakage, and corrosion.
Internal pressure acts upon the faces of the V, forcing the gasket to seal against the flange faces. Most spiral wound gasket applications will use two standard gasket thicknesses: 1/8 inch and 3/16 inch. With 1/8 inch thick gaskets, compression to a 0.100 inch thickness is recommended. For 3/16 inches, compress to a 0.13 inch thickness.
Dennison Mending Tape from the second half of the 20th century. From the Museo del Objeto del Objeto collection. Pressure-sensitive tape, PSA tape, self-stick tape or sticky tape consists of a pressure sensitive adhesive coated onto a backing material such as paper, plastic film, cloth, or metal foil. It is sticky (tacky) without any heat or ...
Cellophane is also used in transparent pressure-sensitive tape, tubing, and many other similar applications. Cellophane is compostable and biodegradable, and can be obtained from biomaterials. [ 1 ] The original production process uses carbon disulfide (CS 2 ), which has been found to be highly toxic to workers. [ 2 ]
Indium wire is used as a gasket in demountable seals. Gold wire is used as a gasket in demountable seals for ultra-high vacuum, as well as an alternative to lead-tin solder for making electrical connections. Platinum is a highly chemically inert material with high cost and low outgassing. Zirconium is corrosion-resistant.
The most common cold solvent operation, this is usually used in small maintenance degreasers using a petroleum or mineral solvent. Usually to remove the bulk of the material, and prepare it for the cleaning tank.