Search results
Results from the WOW.Com Content Network
The membrane gas separation equipment typically pumps gas into the membrane module and the targeted gases are separated based on difference in diffusivity and solubility. For example, oxygen will be separated from the ambient air and collected at the upstream side, and nitrogen at the downstream side.
Portable oxygen concentrator used with bottle humidifier. POCs operate on the same principle as a home concentrator, pressure swing adsorption. [6] The basic set up of a POC is a miniaturized air compressor, a cylinder filled containing the sieve, a pressure equalizing reservoir and valves and tubes.
The first patent for an oxygen scavenger used an alkaline solution of pyrogallic acid in an air-tight vessel. [7] [8]Modern scavenger sachets use a mixture of iron powder and sodium chloride. [8]
The development of heated humidified high flow started in 1999 with Vapotherm introducing the concept of high flow use with race horses. [2]High flow was approved by the U.S. Food and Drug Administration in the early 2000s and used as an alternative to positive airway pressure for treatment of apnea of prematurity in neonates. [3]
A resuscitator is a device using positive pressure to inflate the lungs of an unconscious person who is not breathing, in order to keep them oxygenated and alive. [citation needed] There are three basic types: a manual version (also known as a bag valve mask) consisting of a mask and a large hand-squeezed plastic bulb using ambient air, or with supplemental oxygen from a high-pressure tank.
High pressure oxygen storage cylinder, colloquially referred to as an oxygen tank. Oxygen tanks are used to store gas for: medical breathing (oxygen therapy) at medical facilities and at home (high pressure cylinder)
High altitude breathing apparatus is used for unpressurised (ambient pressure) aeronautical and mountaineering activities where the oxygen content of the natural atmosphere is insufficient for maintaining physical activity, consciousness, or life, but the atmospheric pressure is sufficient that a pressure suit is not needed.
The pin index safety system uses a face seal between the cylinder valve and the associated yoke clamp. There are two holes in specific positions on the cylinder valve body below the outlet port , in positions associated with the gas mixture, which prevent connection of the cylinder to a yoke or pressure regulator with a mis-matched set of pins.