Ad
related to: telescope camera adapter
Search results
Results from the WOW.Com Content Network
The T-mount is a standard lens mount for cameras and other optical assemblies. The usual T-mount is a screw mount using a male 42×0.75 (42 mm diameter, 0.75 mm thread pitch) metric thread on the lens with a flange focal distance of 55 mm and a mating female 42mm thread on a camera adapter or other optical component.
A teleside converter lens attached in front of a camera. 2 - Camera lens 1 - Teleside converter. A teleside converter [1] (also known as a telephoto conversion lens or a front mount teleconverter) [2] is a secondary lens which is mounted on the front of a photographic lens to increase the effective focal length of the lens they are attached to.
To use a telescope as a camera lens requires an adapter for the standard 1.25 inch tube eyepiece mount, usually a T-mount adapter, which in turn attaches to an adapter for the system camera's particular lens mount. Controlling exposure is done by exposure time, gain, or filters since telescopes almost always lack diaphragms for aperture adjustment.
M42 adapters work best on bodies with a flange depth less than or equal to the M42's flange depth, which includes the popular Canon EF-mount, the Pentax K-mount, the Minolta/Konica Minolta/Sony A-mount, the Sony E-mount, the Samsung NX-mount, the Fujifilm X-mount and the Four Thirds System including the Micro Four Thirds system. This allows the ...
L1 - Telescope objective L2 - Eyepiece L3 - Camera lens. Afocal photography, also called afocal imaging or afocal projection is a method of photography where the camera with its lens attached is mounted over the eyepiece of another image forming system such as an optical telescope or optical microscope, with the camera lens taking the place of ...
A teleconverter works similarly to a telephoto group of a proper telephoto lens.It consists of a group of lenses which together act as a single diverging lens. The location of a teleconverter is such that the image produced by the lens is located behind the teleconverter in a distance smaller than its focal length.
Furthermore, the adapter may require an additional optical element to correct for varied registration distances (the distance from the rear of the mount to the focal plane on the image sensor or film). Adapters may not be available to bridge every combination of lens mount and camera mount.
Primary lens: The objective of a refracting telescope. Primary mirror: The objective of a reflecting telescope. Corrector plate: A full aperture negative lens placed before a primary mirror designed to correct the optical aberrations of the mirror. Schmidt corrector plate: An aspheric-shaped corrector plate used in the Schmidt telescope.
Ad
related to: telescope camera adapter