Search results
Results from the WOW.Com Content Network
More rarely encountered is the model for solvents with a density greater than water. This type has a tube at the bottom of the collection vessel to allow the organic solvent at the bottom to flow back into the reaction vessel. The water generated during the reaction floats on top of the organic phase.
The Chrysler Slant-Six is the popular name for an overhead valve inline-6 engine produced by Chrysler Motors between 1959 and 2000. Featuring a reverse-flow cylinder head and cylinder bank inclined at a 30-degree angle from vertical, it was introduced in 170 cu in (2.8 L) and 225 cu in (3.7 L) displacements for the 1960 model year.
Cleaning methods encompass solvent cleaning, hot alkaline detergent cleaning, electro-cleaning, and acid etch. In industrial settings, the water-break test is a common practice to assess machinery cleanliness. This test involves thoroughly rinsing and vertically holding the surface.
Solvent degreasing is a process used to prepare a part for further operations such as electroplating or painting. Typically it uses petroleum , chlorine , dry ice or alcohol based solvents to dissolve the machining fluids and other contaminants that might be on the part.
The solvent is heated to reflux. The solvent vapour travels up a distillation arm, and floods into the chamber housing the thimble of solid. The condenser ensures that any solvent vapour cools, and drips back down into the chamber housing the solid material. The chamber containing the solid material slowly fills with warm solvent.
Get AOL Mail for FREE! Manage your email like never before with travel, photo & document views. Personalize your inbox with themes & tabs. You've Got Mail!
In an internal combustion engine, a head gasket provides the seal between the engine block and cylinder head(s). Its purpose is to seal the combustion gases within the cylinders and to avoid coolant or engine oil leaking into the cylinders. [1] Leaks in the head gasket can cause poor engine running and/or overheating.
Carbon tetrachloride was the first chlorinated solvent to be used in dry-cleaning and was used until the 1950s. [46] It had the downsides of being corrosive to the dry-cleaning equipment and causing illness among dry-cleaning operators, and was replaced by trichloroethylene, tetrachloroethylene [46] and methyl chloroform (trichloroethane). [47]