Search results
Results from the WOW.Com Content Network
Engine power is the power that an engine can develop. It can be expressed in power units, most commonly kilowatt, metric horsepower (often abbreviated PS), or horsepower.In terms of internal combustion engines, the engine power usually describes the rated power, which is a power output that the engine can maintain over a long period of time according to a certain testing method, for example ...
During testing, the output torque and rotational speed are measured to determine the brake horsepower. Horsepower was originally measured and calculated by use of the "indicator diagram" (a James Watt invention of the late 18th century), and later by means of a Prony brake connected to the engine's output shaft
For example, an unloaded motor of = 5,700 rpm/V supplied with 11.1 V will run at a nominal speed of 63,270 rpm (= 5,700 rpm/V × 11.1 V). The motor may not reach this theoretical speed because there are non-linear mechanical losses.
The useful power of an engine with shaft power output can be calculated using a dynamometer to measure torque and rotational speed, with maximum power reached when torque multiplied by rotational speed is a maximum. For jet engines the useful power is equal to the flight speed of the aircraft multiplied by the force, known as net thrust ...
In this case, unless external limitations are applied, the maximum torque is achieved at low RPM. For example, the AC motor found in the Tesla Roadster (2008) produces near constant maximum torque from 0 to about 6000 RPM, while maximum power occurs at about 10000 RPM, long after torque begins to drop off. The Roadster's redline is 14000 RPM.
Speed has dropped out of the equation, and the only variables are the torque and displacement volume. Since the range of maximum brake mean effective pressures for good engine designs is well established, we now have a displacement-independent measure of the torque-producing capacity of an engine design – a specific torque of sorts.
The torque is then related to the lever length, shaft diameter and measured force. The device is generally used over a range of engine speeds to obtain power and torque curves for the engine, since there is a non-linear relationship between torque and engine speed for most engine types. Power output in SI units may be calculated as follows:
2600 The 2600 was the same BF-161 engine made in Brazil by Willys-Overland's subsidiary, but it had two one-barrel carburetors (simultaneously opened) and had an output of 130 hp (97 kW; 132 PS) at 4400 rpm and 140 lb⋅ft (190 N⋅m) of torque at 2000 rpm. The compression ratio remained 7.6:1.