Search results
Results from the WOW.Com Content Network
Plank on bulkhead, a technique in which a series of shaped bulkheads are placed along the keel to form a shaped stage which will be covered with planks to form the hull of the model. Plank on frame In this technique, the model is built just as the full-size wooden ship is constructed. The keel is laid down in a manner which keeps it straight ...
As ship design evolved from craft to science, designers learned various ways to produce long curves on a flat surface. Generating and drawing such curves became a part of ship lofting; "lofting" means drawing full-sized patterns, so-called because it was often done in large, lightly constructed mezzanines or lofts above the factory floor.
Carvel built or carvel planking is a method of boat building in which hull planks are laid edge to edge and fastened to a robust frame, thereby forming a smooth surface. Traditionally the planks are neither attached to, nor slotted into, each other, having only a caulking sealant between the planks to keep water out.
In sailing and boating, a vessel's freeboard is the distance from the waterline to the upper deck level, measured at the lowest point of sheer where water can enter the boat or ship. [1] In commercial vessels, the latter criterion measured relative to the ship's load line , regardless of deck arrangements, is the mandated and regulated meaning.
Clinker is a planking-first technique originally identified with the Scandinavians and Ingveonic people in which wooden planks are fixed to each other with a slight overlap that is beveled for a tight fit. The planks are mechanically connected to each other with copper rivets, bent over iron nails, screws or in modern boats with adhesives.
Some model shipwright guilds are incorporated into government and Naval facilities, achieving a semi-official status as a clearinghouse for information on naval history, ship design and, at times, teaching the craft of ship modeling, through model building, restoration, repair of the facility's models, as well as, museum docent services.
The earliest example of ship and boat building using overlapped planking joined with metal fastenings is in an extended logboat from Björke in Sweden. This dates to c. 310 AD. The Nydam boat is an almost complete example of a boat built with clinker construction. It has overlapping planks joined with iron nails driven through the lap.
Boat deck: Especially on ships with sponsons, the deck area where lifeboats or the ship's gig are stored. Boiler deck: (river steamers) The passenger deck above the vessel's boilers. Bridge deck: (a) The deck area including the helm and navigation station, and where the Officer of the Deck/Watch will be found, also known as the conn.