Search results
Results from the WOW.Com Content Network
A damp-proof course (DPC) [2] is a barrier through the structure designed to prevent moisture rising by capillary action such as through a phenomenon known as rising damp. Rising damp is the effect of water rising from the ground into property. [3] The damp proof course may be horizontal or vertical. [4]
Meteorological data includes wind speeds which may be expressed as statute miles per hour, knots, or meters per second. Here are the conversion factors for those various expressions of wind speed: 1 m/s = 2.237 statute mile/h = 1.944 knots 1 knot = 1.151 statute mile/h = 0.514 m/s 1 statute mile/h = 0.869 knots = 0.447 m/s. Note:
The clo has the same dimensions as the R value (square metre kelvins per watt or m 2 ⋅K/W) used to describe insulation used in residential and commercial construction—thus, the higher the value, the better the insulation performance. 1 clo = 0.155 K·m 2 ·W −1 ≈ 0.88 K·m 2 ·BTU·W −1 ·ft −2 ·°F −1 ·hr −1 R.
A slab-on-grade or basement floor should be poured over a cross-laminated polyethylene vapor barrier over 4 inches (10 cm) of granular fill to prevent wicking of moisture from the ground and radon gas incursion. Inside a steel building, water vapor will condense whenever it comes into contact with a surface that is below the dew point temperature.
kilogram-force per square millimetre: kgf/mm 2: ≡ 1 kgf/mm 2 = 9.806 65 × 10 6 Pa [33] kip per square inch: ksi ≡ 1 kipf/sq in ≈ 6.894 757 × 10 6 Pa [33] long ton per square foot: ≡ 1 long ton × g 0 / 1 sq ft ≈ 1.072 517 801 1595 × 10 5 Pa: micrometre of mercury: μmHg ≡ 13 595.1 kg/m 3 × 1 μm × g 0 ≈ 0.001 torr ≈ 0.133 ...
kelvin square-metre per watt (K⋅m 2 /W or, equally, °C⋅m 2 /W), whereas the I-P (inch-pound) unit is degree Fahrenheit square-foot hour per British thermal unit (°F⋅ft 2 ⋅h/BTU). [13] For R-values there is no difference between U.S. and Imperial units, so the same I-P unit is used in both.
Damp-proofing rods are available with BBA approval. The rods are placed into holes drilled in the mortar course and the active ingredients diffuse along the mortar line before curing to form a damp-proof course. [53] Damp-proofing rods are usually supplied in 180mm (7") lengths suitable for inserting into a 9-inch thick wall.
The purpose of a Vertical Damp Proof Barrier is to prevent the ingress of damp and water into subterranean structures such as basements, cellars, tunnels and earth shielded buildings. (Also known as Earth sheltered buildings ).