Search results
Results from the WOW.Com Content Network
Dual-channel memory slots, color-coded orange and yellow for this particular motherboard. Dual-channel-enabled memory controllers in a PC system architecture use two 64-bit data channels. Dual-channel should not be confused with double data rate (DDR), in which data exchange happens twice per DRAM clock. The two technologies are independent of ...
Infineon/Kingston (a memory vendor) Dual Channel DDR Memory Whitepaper at the Wayback Machine (archived 2011-09-29) – explains dual channel memory controllers, and how to use them; Introduction to Memory Controller; Intel guide on Single- and Multichannel Memory Modes [dead link ] What is a Memory Controller and How Does it Work
DDR memory bus width per channel is 64 bits (72 for ECC memory). Total module bit width is a product of bits per chip and number of chips. It also equals number of ranks (rows) multiplied by DDR memory bus width. Consequently, a module with a greater number of chips or using ×8 chips instead of ×4 will have more ranks.
Moreover, if a mainboard has a dual-or quad-channel memory subsystem, all of the memory channels must be upgraded simultaneously. 16-bit modules provide one channel of memory, while 32-bit modules provide two channels. Therefore, a dual-channel mainboard accepting 16-bit modules must have RIMMs added or removed in pairs.
There is only a little difference between a dual rank UDIMM and two single-rank UDIMMs in the same memory channel, other than that the DRAMs reside on different PCBs. The electrical connections between the memory controller and the DRAMs are almost identical (with the possible exception of which chip selects go to which ranks). Increasing the ...
Memory architecture also explains how binary digits are converted into electric signals and then stored in the memory cells. And also the structure of a memory cell. For example, dynamic memory is commonly used for primary data storage due to its fast access speed.
The lower memory clock frequency may also enable power reductions in applications that do not require the highest available data rates. According to JEDEC [5] the maximum recommended voltage is 1.9 volts and should be considered the absolute maximum when memory stability is an issue (such as in servers or other mission critical devices). In ...
DDR4 memory is supplied in 288-pin dual in-line memory modules (DIMMs), similar in size to 240-pin DDR3 DIMMs. DDR4 RAM modules feature pins that are spaced more closely at 0.85 mm compared to the 1.0 mm spacing in DDR3, allowing for a higher pin density within the same standard DIMM length of 133.35 mm (5¼ inches).