Search results
Results from the WOW.Com Content Network
The energy content of ethanol is 76,100 BTU/US gal (5.89 kilowatt-hours per litre), compared to 114,100 BTU/US gal (8.83 kWh/L) for gasoline. (see chart above) A flex-fuel vehicle will experience about 76% of the fuel mileage MPG when using E85 (85% ethanol) products as compared to 100% gasoline. Simple calculations of the BTU values of the ...
The M970 Semi-Trailer Refueler is a 5,000-U.S.-gallon (19,000 L; 4,200 imp gal) fuel dispensing tanker designed for under/overwing refueling of aircraft. It is equipped with a filter/separator, recirculation system and two refueling systems, one for underwing and one for overwing servicing.
A larger fuel-tank results in a greater range for the car between refills, however the weight and space requirements of a larger tank are undesirable, especially in smaller cars. The average fuel tank capacity for cars is 50–60 L (12–16 US gal). [3] The most common materials for fuel tanks are metal or plastic.
Fuel tanks of a capacity greater than 25 US gallons must adhere to specifications for spillage, leakage, mounting, impact survivability, weld requirements, venting and a host of other stipulations. The regulations require side-mounted fuel tanks to survive a 30-foot drop test, while non-side-mounted fuel tanks must survive a 10-foot drop test.
Oil conversion factor from m³ to bbl (or stb) is 6.28981100 Gas conversion factor from standard m³ to scf is 35.314666721 Note that the m³ gas conversion factor takes into account a difference in the standard temperature base for measurement of gas volumes in metric and imperial units.
Standard fuel bladder tanks sizes range from 100-US-gallon (380 L) to 200,000-US-gallon (760,000 L) capacities and larger. Custom fuel storage bladders and cells are available, although at sizes exceeding 50,000 US gallons (190,000 L) there is an increased spill risk.
Fuel consumption is the reciprocal of fuel economy, and measures the fuel used to drive a fixed distance (units of gal/100 miles or kWh/100 miles). [36] The unit of Gal/100 miles is accurately described as fuel consumption in some EPA brochures, but this unit appears in the fuel economy section of the Monroney label (which does not use the term ...
With a fuel fraction of nearly 85%, the GlobalFlyer could carry 5 times its weight in fuel.. In aerospace engineering, an aircraft's fuel fraction, fuel weight fraction, [1] or a spacecraft's propellant fraction, is the weight of the fuel or propellant divided by the gross take-off weight of the craft (including propellant): [2]