Search results
Results from the WOW.Com Content Network
10 Gbit/s: 1.25 GB/s: RapidIO Gen2 2x: 10 Gbit/s: 1.25 GB/s: 2008 10 Gigabit Ethernet (10GBASE-X) 10 Gbit/s: 1.25 GB/s: 2002-2006 Myri 10G: 10 Gbit/s: 1.25 GB/s: InfiniBand FDR-10 1× [24] 10 Gbit/s: 1.25 GB/s: 2011 NUMAlink 2: 12.8 Gbit/s: 1.6 GB/s: 1996 InfiniBand FDR 1× [24] 13.64 Gbit/s: 1.7 GB/s: 2011 InfiniBand SDR 8× [23] 16 Gbit/s: 2 ...
The ISQ symbols for the bit and byte are bit and B, respectively.In the context of data-rate units, one byte consists of 8 bits, and is synonymous with the unit octet.The abbreviation bps is often used to mean bit/s, so that when a 1 Mbps connection is advertised, it usually means that the maximum achievable bandwidth is 1 Mbit/s (one million bits per second), which is 0.125 MB/s (megabyte per ...
In this convention, one thousand and twenty-four megabytes (1024 MB) is equal to one gigabyte (1 GB), where 1 GB is 1024 3 bytes (i.e., 1 GiB). Mixed 1 MB = 1 024 000 bytes (= 1000×1024 B) is the definition used to describe the formatted capacity of the 1.44 MB 3.5-inch HD floppy disk , which actually has a capacity of 1 474 560 bytes .
Due to typical file system design, the amount of space allocated for a file is usually larger than the size of the file's data – resulting in a relatively small amount of storage space for each file, called slack space or internal fragmentation, that is not available for other files but is not used for data in the file to which it belongs.
Thus, a representation that compresses the storage size of a file from 10 MB to 2 MB yields a space saving of 1 - 2/10 = 0.8, often notated as a percentage, 80%. For signals of indefinite size, such as streaming audio and video, the compression ratio is defined in terms of uncompressed and compressed data rates instead of data sizes:
So a designation of 9600-8-E-2 would be 9,600 bits per second, with eight bits per character, even parity and two stop bits. A common set-up of an asynchronous serial connection would be 9600-8-N-1 (9,600 bit/s, 8 bits per character, no parity and 1 stop bit) - a total of 10 bits transmitted to send one 8 bit character (one start bit, the 8 ...
In telecommunications and computing, bit rate (bitrate or as a variable R) is the number of bits that are conveyed or processed per unit of time. [1]The bit rate is expressed in the unit bit per second (symbol: bit/s), often in conjunction with an SI prefix such as kilo (1 kbit/s = 1,000 bit/s), mega (1 Mbit/s = 1,000 kbit/s), giga (1 Gbit/s = 1,000 Mbit/s) or tera (1 Tbit/s = 1,000 Gbit/s). [2]
A standardized variant of 10 Gigabit Ethernet, called WAN PHY, is designed to inter-operate with OC-192 transport equipment while the common version of 10 Gigabit Ethernet is called LAN PHY (which is not compatible with OC-192 transport equipment in its native form). The naming is somewhat misleading, because both variants can be used on a wide ...