Search results
Results from the WOW.Com Content Network
Hush kit for the Pratt and Whitney JT8D-1 through -17 engines Two JT4As installed on a KLM DC-8. A hush kit is an aerodynamic device used to help reduce the noise produced by older aircraft jet engines. These devices are typically installed on older turbojet and low-bypass turbofan engines, as they are much louder than later high-bypass ...
A vacuum ejector, or simply ejector, or aspirator, is a type of vacuum pump, which produces vacuum by means of the Venturi effect.. In an ejector, a working fluid (liquid or gaseous) flows through a jet nozzle into a tube that first narrows and then expands in cross-sectional area.
Jet noise may be reduced by adding features to the exit of the nozzle which increase the surface area of the cylindrical jet. Commercial turbojets and early by-pass engines typically split the jet into multiple lobes. Modern high by-pass turbofans have triangular serrations, called chevrons, which protrude slightly into the propelling jet.
It is a fluid-dynamic pump with no moving parts except a valve to control inlet flow. Depending on the application, an injector can also take the form of an eductor-jet pump, a water eductor or an aspirator. An ejector operates on similar principles to create a vacuum feed connection for braking systems etc.
[1] Fuel is piped through fuel lines to a fuel control valve (usually known as the fuel selector). This valve serves several functions. The first function is to act as a fuel shut-off valve. This is required to provide the crew with a means to prevent fuel reaching the engine in case of an engine fire.
A pump-jet, hydrojet, or water jet is a marine system that produces a jet of water for propulsion. The mechanical arrangement may be a ducted propeller (axial-flow pump), a centrifugal pump, or a mixed flow pump which is a combination of both centrifugal and axial designs. The design also incorporates an intake to provide water to the pump and ...
The pump element is still on the way down, the solenoid is now energised and the fuel line is immediately closed. The fuel cannot pass back into the return duct, and is now compressed by the plunger until pressure exceeds specific “opening” pressure, and the injector nozzle needle lifts, allowing fuel to be injected into the combustion ...
The Martin-Baker MB 5 which first flew in 1944 had started out as the second MB 3 prototype but was extensively redesigned with a tubular steel fuselage. It used the Griffon engine driving contra-rotating propellers. [11] [12] Martin-Baker MB 6 (1945): a Second World War jet fighter project with a swing-arm, 0/0 spring-loaded ejection seat.