Search results
Results from the WOW.Com Content Network
The imperial system has a hundredweight, defined as eight stone of 14 lb each, or 112 lb (50.802 345 44 kg), whereas a US hundredweight is 100 lb (45.359 237 kg). In both systems, 20 hundredweights make a ton. In the US, the terms long ton (2240 lb, 1 016.046 9088 kg) and short ton (2000 lb; 907.184 74 kg) are used.
The teaspoon, tablespoon, and cup are defined in terms of a fluid ounce as 1 ⁄ 6, 1 ⁄ 2, and 8 fluid ounces respectively. The fluid ounce derives its name originally from being the volume of one ounce avoirdupois of water, [citation needed] but in the US it is defined as 1 ⁄ 128 of a US gallon. Consequently, a fluid ounce of water weighs ...
The US fluid ounce is based on the US gallon, which in turn is based on the wine gallon of 231 cubic inches that was used in the United Kingdom prior to 1824. With the adoption of the international inch, the US fluid ounce became ⁄128 gal × 231 in 3 /gal × (2.54 cm/in) 3 = 29.5735295625 mL exactly, or about 4% larger than the imperial unit.
The US Customary system of units makes use of set of dry units of capacity that have a similar set of names [Note 7] to those of liquid capacity, though different volumes: the dry pint having a volume of 33.6 cubic inches (550 ml) against the US fluid pint's volume of 28.875 cubic inches (473 ml) and the imperial pint of 34.68 cubic inches (568 ...
A centimetre of water[1] is a unit of pressure. It may be defined as the pressure exerted by a column of water of 1 cm in height at 4 °C (temperature of maximum density) at the standard acceleration of gravity, so that 1 cmH2O (4°C) = 999.9720 kg/m3 × 9.80665 m/s2 × 1 cm = 98.063754138 Pa ≈ 98.0638 Pa, but conventionally a nominal maximum ...
Water bottles for personal use can have their capacity measured in fluid ounces or liters. For ounces, the measurements are typically in multiples of 8, for example 32 fl oz and 40 fl oz, which correspond closely to common metric variants including 1 liter and 1.2 liters. Rainfall is usually measured based on the height from the ground in ...
= 10 parts per million by volume = 10 ppmv = 10 volumes/10 6 volumes NO x molar mass = 46 kg/kmol = 46 g/mol Flow rate of flue gas = 20 cubic metres per minute = 20 m 3 /min The flue gas exits the furnace at 0 °C temperature and 101.325 kPa absolute pressure. The molar volume of a gas at 0 °C temperature and 101.325 kPa is 22.414 m 3 /kmol.
The stone is not a measurement of weight used in the US. The US customary system uses the short hundredweight of 100 lb and short ton of 2,000 lb. Where these systems most notably differ is in their units of volume. A US fluid ounce (fl oz), about 29.6 millilitres (ml), is slightly