Search results
Results from the WOW.Com Content Network
High power lasers use a single crystal, but many laser diodes are arranged in strips (multiple diodes next to each other in one substrate) or stacks (stacks of substrates). This diode grid can be imaged onto the crystal by means of a lens. Higher brightness (leading to better beam profile and longer diode lifetimes) is achieved by optically ...
Schematic diagram of a typical laser, showing the three major parts. A laser is constructed from three principal parts: An energy source (usually referred to as the pump or pump source), A gain medium or laser medium, and; Two or more mirrors that form an optical resonator.
Laser pumping lamps. The top three are xenon flashlamps while the bottom one is a krypton arc lamp External triggering was used in this extremely fast discharge. Due to the very high speed, (3.5 microseconds), the current is not only unable to fully heat the xenon and fill the tube, but is still in direct contact with the glass.
Optical pumping is a process in which light is used to raise (or "pump") electrons from a lower energy level in an atom or molecule to a higher one. It is commonly used in laser construction to pump the active laser medium so as to achieve population inversion. The technique was developed by the 1966 Nobel Prize winner Alfred Kastler in the ...
The laser diode chip removed and placed on the eye of a needle for scale A laser diode with the case cut away. The laser diode chip is the small black chip at the front; a photodiode at the back is used to control output power. SEM (scanning electron microscope) image of a commercial laser diode with its case and window cut away. The anode ...
Fig.1. An optically pumped disk laser (active mirror). A disk laser or active mirror (Fig.1) is a type of diode pumped solid-state laser characterized by a heat sink and laser output that are realized on opposite sides of a thin layer of active gain medium. [1] Despite their name, disk lasers do not have to be circular; other shapes have also ...
Laser rods (from left to right): Ruby, alexandrite, Er:YAG, Nd:YAG. A solid-state laser is a laser that uses a gain medium that is a solid, rather than a liquid as in dye lasers or a gas as in gas lasers. [1] Semiconductor-based lasers are also in the solid state, but are generally considered as a separate class from solid-state lasers, called ...
A green laser pointer is a frequency doubled Nd:YVO 4 diode-pumped solid state laser . [48] Nd:YAG can be also made to lase at its non-principal wavelength. The line at 946 nm is typically employed in "blue laser pointer" DPSS lasers, where it is doubled to 473 nm. [49] [50] [51]