Search results
Results from the WOW.Com Content Network
The 400 cu in (6.6 L) B engine was introduced in 1972 to replace the venerable 383, and were power-rated via the net (installed) method. Chrysler increased the bore size of the 383 to create the 400. Its bore of 4.342-inch (110.3 mm) was the largest used in any production Chrysler V8 at the date of its introduction.
In 1970, Chrysler introduced a special triple carburetor version of the 340 with triple 2-barrels at 290 hp (216 kW) gross. Exclusively called the catchy Six-Pack on the Trans-Am targeted Dodge Challenger TA models, the same configuration was used by Plymouth for its Trans-Am AAR 'Cuda, called just the "340-6" or "six barrel". This race ...
A new engine option made the Charger's list for the first time, the 440 Six Pack. With three two-barrel carburetors and a rating of 390 hp (291 kW), it was one of the most exotic setups since the cross-ram Max Wedge engines of the early 1960s. The Six Pack was previously used on the mid-year 1969 Dodge Super Bee and Plymouth Road Runner.
The Hemi-6 valves are angled apart (splayed) 18 degrees (included angle) along the crankshaft axis, and the intake valves are as large as 1.96 in (50 mm). The 6 intake and 6 exhaust valves open slightly towards each other and away from the cylinder wall, which results in less "shrouding" of the valves and greater airflow potential.
The last GMC-only straight six was the 270-cubic-inch (4.4 L) 270. It was produced from 1941 through 1963, and was an OHV/pushrod engine. This is a raised-deck engine. The bore was 3.78125" (same as 256) and stroke was 4 inches (101.6 mm). Power listed in 1963 as 133 HP @ 3600 rpm; torque 244 lb ft @ 1300 rpm.
A 4.6-litre Rover V8 engine with SU carbs, fitted to a Rover P6. In 1995, Land Rover enlarged the Rover V8 to 4,552 cc (4.6 L; 277.8 cu in). The bore remained the same size as the previous 4.0 at 94 mm (3.7 in), but the engine was stroked by 10.9 mm (0.43 in) giving 82 mm (3.23 in) in total.
Engine power is the power that an engine can put out. It can be expressed in power units, most commonly kilowatt, pferdestärke (metric horsepower), or horsepower.In terms of internal combustion engines, the engine power usually describes the rated power, which is a power output that the engine can maintain over a long period of time according to a certain testing method, for example ISO 1585.
The 390 cu in (6.4 L) AMC V8 produced 325 hp (330 PS; 242 kW) and 420 lb⋅ft (569 N⋅m; 58 kg⋅m) of torque in all except the Rebel Machine. This muscle car engine was rated at 340 hp (345 PS; 254 kW) and 430 lb⋅ft (583 N⋅m; 59 kg⋅m) of torque due to a different intake. Production only lasted one year (1970) before it was stroked to ...