Search results
Results from the WOW.Com Content Network
Device configuration overlay (DCO) is a hidden area on many of today's hard disk drives (HDDs). Usually when information is stored in either the DCO or host protected area (HPA), it is not accessible by the BIOS (or UEFI), OS, or the user. However, certain tools can be used to modify the HPA or DCO.
Prior to the development and ubiquitous adoption of the Plug and Play BIOS standard, an add-on device such as a hard disk controller or a network adapter card (NIC) was generally required to include an option ROM in order to be bootable, as the motherboard BIOS did not include any support for the device and so could not incorporate it into the BIOS's boot protocol.
Bootloader unlocking is the process of disabling the bootloader security that makes secure boot possible. It can make advanced customizations possible, such as installing custom firmware . On smartphones , this can be a custom Android distribution or another mobile operating system .
Other devices may not be booted from USB, if in BIOS it is set to 'Legacy mode'Legacy mode. Due to the additional write cycles that occur on a full installation, the life span of the used USB may be shortened. [4] To mitigate this, a USB hard drive can be used, as they give better performance than the USB stick, regardless of the connector.
Rufus was originally designed [5] as a modern open source replacement for the HP USB Disk Storage Format Tool for Windows, [6] which was primarily used to create DOS bootable USB flash drives. The first official release of Rufus, version 1.0.3 (earlier versions were internal/alpha only [ 7 ] ), was released on December 4, 2011, with originally ...
When used, the BIOS boot partition contains the second stage of the boot loader program, such as the GRUB 2; the first stage is the code that is contained within the Master Boot Record (MBR). Use of this partition is not the only way BIOS-based boot can be performed while using GPT-partitioned hard drives; however, complex boot loaders such as ...
The boot ROM of NXP systems on a chip (SOCs) support configuring the peripherals through specific pins of the system on a chip. On the i.MX6 family it also supports configuring the boot order through efuses. The boot ROM of several NXP SoCs have many ways to load the first stage bootloader (from eMMC, microSD, USB, etc.).
A USB flash drive needs to be connected to the system, and be detected by it; One or more partitions may need to be created on the USB flash drive; The "bootable" flag must be set on the primary partition on the USB flash drive; An MBR must be written to the primary partition of the USB flash drive