Search results
Results from the WOW.Com Content Network
The millimetre (SI symbol: mm) is a unit of length in the metric system equal to 10 −3 metres ( 1 / 1 000 m = 0.001 m). To help compare different orders of magnitude , this section lists lengths between 10 −3 m and 10 −2 m (1 mm and 1 cm).
A thousandth of an inch is a derived unit of length in a system of units using inches.Equal to 1 ⁄ 1000 of an inch, a thousandth is commonly called a thou / ˈ θ aʊ / (used for both singular and plural) or, particularly in North America, a mil (plural mils).
A medium grain of sand (0.5 mm diameter, 1.5 milligrams) 5 × 10 −10: Volume of a poppy seed of 1-millimetre diameter [1] 1 × 10 −9: One cubic millimetre or one microlitre: 4 × 10 −9: Volume of a mustard seed of 2-millimetre diameter 2 × 10 −8: Volume of a small grain of rice 2 mm wide by 5 mm long
Many other sizes were in use, however, before the Eversharp's success made its .046 inch lead size a de facto standard (this size has been variously metricized as 1.1, 1.18, and 1.2 mm, all nominal sizes). Thinner .036 inch (0.9 mm) lead was introduced in the later 1930s and gradually became the new standard, eventually being displaced by 0.7 mm.
is the diameter of the particle or grain in millimeters (Krumbein and Monk's equation) [2] and D 0 {\\displaystyle D_{0}} is a reference diameter, equal to 1 mm (to make the equation dimensionally consistent ).
Vernier caliper scales; main at top, vernier at bottom. It reads 3.58 ± 0.02 mm by adding 3.00 mm (left red mark) on the fixed main scale to vernier 0.58 mm (right red mark). The main scale reading is that to the left of the zero on the vernier scale. The vernier reading is found by locating the best aligned lines between the two scales.
Mommes (mm), traditionally used to measure silk fabrics, the weight in pounds of a piece of fabric if it were sized 45 inches by 100 yards (1.2 m by 90 m). One momme = 4.340 g/m 2; 8 mommes is approximately 1 ounce per square yard or 35 g/m 2.
Sedimentation time is longest for the finest particles, so this technique is useful for sizes below 10 μm, but sub-micrometer particles cannot be reliably measured due to the effects of Brownian motion. Typical apparatus disperses the sample in liquid, then measures the density of the column at timed intervals.