Search results
Results from the WOW.Com Content Network
EIAJ-04 (also called JSBP 4): For 10.5–13.5 V. 5.5 mm OD, 3.4 mm ID. EIAJ-05 (also called JSBP 5): For 13.5–18 V. 6.5 mm OD, 4.4 mm ID. EIAJ-04 and 05 have an internal male pin in the plug. The 01 through 03 sizes do not and are similar to the generic plugs in structure. These five EIAJ plugs are 9.5 mm in length and have a current rating ...
The Type 3C interface was developed approximately ten years later for the transmission of power at more than 3 kW; [5]: 56 the EV Plug Alliance was formed in March 2010 to promote the use of the Type 3C connector as "a high safety plug and socket solution" in Mode 3 (3–22 kW) AC charging.
Universal charger or common charger refers to various projects to standardize the connectors of power supplies, particularly for battery-powered devices. Since the publication of the USB Power Delivery standard in 2012, and the USB-C connector in 2014, USB-C has become a widespread standard for charging mobile phones.
SAE J1772, also known as a J plug or Type 1 connector after its international standard, IEC 62196 Type 1, is a North American standard for electrical connectors for electric vehicles maintained by SAE International under the formal title "SAE Surface Vehicle Recommended Practice J1772, SAE Electric Vehicle Conductive Charge Coupler".
The power supply was required to have an output capacitive energy of less than 15.1 µJ and an inductive energy at disconnect of less than 5.3 µJ. [ 1 ] The standard defines an AC adapter to power devices requiring from 10 W to 130 W (~20 V × 6.5 A) or (extended voltage option) up to 240 W (60 V × 4 A). [ 2 ]
CCS1 (Combined Charging System Combo 1) plug as used in North America. It is an extension of the J1772 standard AC charging connector. CCS Combo 1 vehicle inlet showing the J1772 and the two DC fast-charging pins Connectors: Incomplete Combo 2 (left) showing the two large direct current (DC) pins below, while the four alternating current (AC) pins for neutral and three-phase are removed, while ...
A variety of different kinds of IEC 60320 plugs and sockets. IEC 60320 Appliance couplers for household and similar general purposes [1] is a set of standards from the International Electrotechnical Commission (IEC) specifying non-locking connectors for connecting power supply cords to electrical appliances of voltage not exceeding 250 V (a.c.) and rated current not exceeding 16 A. [1 ...
Known as Kycon 3-pin and 4-pin DC power plugs. Erroneously also known as "Power DIN", [4] although different from any standardized Mini-DIN or DIN connector type. The male plug's mating shell outer diameter is 10 mm (0.39 in), and the pins are 1.5 mm (0.059 in) diameter; Standard may include a limit of 20 V at 7.5 amperes [5]