Search results
Results from the WOW.Com Content Network
Ethernet cable with an M12 X-coded connector in one end and a modular connector in the other. IEC metric screw sized connectors is a family of electrical connectors defined by IEC that are named according to their ISO metric screw thread , namely M5 , M8 and M12 . [ 1 ]
A spacing of 0.05 inch (1.27 mm) is the most usual, allowing for a two-row connector with a pin spacing of 0.1 inch (2.54 mm). These types are used for many types of equipment, in particular for interconnections within an enclosure. For personal computers, this size was used in floppy-disk-drive cables and older or custom Parallel ATA cables.
Two pin sizes are standard in the jacks for this size plug body, 2.1 mm (0.083 in) and 2.5 mm (0.098 in), and the plugs should match. If the size is not known, it is difficult to distinguish by eye or measurement between the 2.1mm and 2.5mm ID plugs; some suppliers suggest simple methods.
The pins are spaced at 0.090 inches (2.3 mm) horizontally and 0.078 inches (2.0 mm) vertically, [7] in what is called high density. The other connectors with the same pin spacing are the DA-26, DB-44, DC-62, DD-78 and 104-pin. They all have three rows of pins, except the DD-78 which has four, and the 104-pin which has five rows. [1]
[citation needed] The larger size has 0.085 inch (2.16 mm) contact pitch. This size, with 36 pins and bail locks, is also known as a Centronics connector because of its introduction by Centronics for use with the parallel port of printers, and is standardized as IEEE 1284 type B. Other connectors of this size are also called Centronics connectors.
2.5 mm ABS1379 PC or UPC ESCON: Enterprise Systems Connection Latch, integral shroud [1] — 2.5 mm IBM mainframe computers and peripherals F07 2.5 mm Japanese Industrial Standard (JIS) LAN, audio systems; for 200 μm fibers, simple field termination possible, mates with ST connectors F-3000 Latch, integral light- and dust-cap — 1.25 mm IEC ...
Diagram of a simple VCSEL structure. The vertical-cavity surface-emitting laser (VCSEL / ˈ v ɪ k s əl /) is a type of semiconductor laser diode with laser beam emission perpendicular from the top surface, contrary to conventional edge-emitting semiconductor lasers (also called in-plane lasers) which emit from surfaces formed by cleaving the individual chip out of a wafer.
They are becoming less common, displaced by SC and LC connectors. [1] The FC connector has been standardized in TIA fiber optic connector intermateability standard EIA/TIA-604-4. [2] The FC connector was originally called a "Field Assembly Connector" by its inventors. [3] The name "FC" is an acronym for "ferrule connector" or "fiber channel". [4]