Ad
related to: ac 1 ton vs 1.5 ft in air unit conversion truck
Search results
Results from the WOW.Com Content Network
When light-duty trucks were first produced in the United States, they were rated by their payload capacity in tons: 1 ⁄ 2 (1000 pounds), 3 ⁄ 4 (1500 pounds) and 1-ton (2000 pounds). Ford had introduced the "One-Tonner" in 1938 to their line of trucks. [23] The "Three-quarter-tonner" appeared in the Ford truck lineup in 1939. [23]
The 1 + 1 ⁄ 4 ton M880-series was based on the Dodge W200, a 3 ⁄ 4 ton capacity 4×4 civilian/commercial truck. The 880/890 had a 2,500 lb cargo rating, enabling it to have a 5 ⁄ 4-ton load rating. The similar 1 + 1 ⁄ 4 ton M890-series was based on the Dodge D200, a 3 ⁄ 4 ton capacity 4×2 civilian/commercial truck.
The sources for these figures are in the correspondent section for each vehicle, in the following article. The conversions amongst different types of units, are well known in the art. For the conversion amongst units of energy in the following table, 1 litre of petrol amounts to 34.2 MJ, 1 kWh amounts to 3.6 MJ and 1 kilocalorie amounts to 4184 J.
It was originally defined as the rate of heat transfer that results in the freezing or melting of 1 short ton (2,000 lb; 907 kg) of pure ice at 0 °C (32 °F) in 24 hours. [1] [2] The modern definition is exactly 12,000 Btu IT /h (3.516853 kW). Air-conditioning and refrigeration equipment capacity in the U.S. is often specified in "tons" (of ...
The G-506 trucks, 1 + 1 ⁄ 2-ton, 4x4, produced as the Chevrolet G7100 (and originally G4100) models, were a series of (light) medium four wheel drive trucks used by the United States Army and its allies during and after World War II. This series came in standard cargo, as well as many specialist type bodies.
E.g., in Japan a Canter 15 is a truck with 1.5 tons payload while pretty much the same truck in Europe was denominated as Canter 35 because of its 3.5 tons gross weight. In Indonesia model names are based on the chassis codes (F codes, e.g. FE71, FE83) opposed to North America where the numerical part of the model name represents the gross ...
Table 3-1.3 The eAxle drive unit is a traction motor with an integrated reduction gearbox and inverter. The permanent magnet AC traction motor has a peak output of 150 kW (200 hp) and a continuous output of 70 kW (94 hp); power is supplied to the wheels through the gearbox with an 11.8:1 ratio. The inverter uses silicon IGBT circuitry. [92]
This class is defined as limited to vehicles less than 4.7 m (15.4 ft) long, 1.7 m (5.6 ft) wide, 2 m (6.6 ft) high and with engine displacement at or under 2,000 cc (120 cu in). Vans, trucks and station wagons (considered commercial vehicles in Japan) in the compact size class receive a "4 number" license prefix.
Ad
related to: ac 1 ton vs 1.5 ft in air unit conversion truck