Search results
Results from the WOW.Com Content Network
Trim tabs are small movable sections resembling scaled down ailerons located at or near the trailing edge of the aileron. On most propeller powered aircraft, the rotation of the propeller(s) induces a counteracting roll movement due to Newton's third law of motion, in that every action has an equal and opposite reaction.
Aileron surface. Ailerons are mounted on the trailing edge of each wing near the wingtips and move in opposite directions. When the pilot moves the aileron control to the left, or turns the wheel counter-clockwise, the left aileron goes up and the right aileron goes down. A raised aileron reduces lift on that wing and a lowered one increases ...
Cockpit controls and instrument panel of a Cessna 182D Skylane. Generally, the primary cockpit flight controls are arranged as follows: [2] A control yoke (also known as a control column), centre stick or side-stick (the latter two also colloquially known as a control or joystick), governs the aircraft's roll and pitch by moving the ailerons (or activating wing warping on some very early ...
In the Boeing 777 there are three primary flight control computers located in the aircraft's electronic equipment bay, responsible for computing and transmitting commands for normal mode flight control surfaces to maintain normal flight, including rudder, elevators, ailerons, flaperons, horizontal stabilizer, multi-functional spoilers, and ...
Such control surfaces include ailerons on the wings for roll control, elevators on the tailplane controlling pitch, and the rudder on the fin controlling yaw. Elevators and ailerons may be combined as elevons on tailless aircraft. The shape of the trailing edge is of prime importance in the aerodynamic function of any aerodynamic surface.
A control system includes control surfaces which, when deflected, generate a moment (or couple from ailerons) about the cg which rotates the aircraft in pitch, roll, and yaw. For example, a pitching moment comes from a force applied at a distance forward or aft of the cg, causing the aircraft to pitch up or down.
Ailerons are similar to flaps (and work the same way), but are intended to provide lateral control, rather than to change the lifting characteristics of both wings together, and so operate differentially – when an aileron on one wing increases the lift, the opposite aileron does not, and will often work to decrease lift.
Ailerons are located inboard on the rear wing which is shoulder-mounted just aft of the pilot. The tandem layout [8] provides positive lift from both pairs of wings; whereas on a conventional aircraft, the tailplane mostly provides negative lift.