Ad
related to: 255.255.255.255 mask
Search results
Results from the WOW.Com Content Network
A wildcard mask can be thought of as an inverted subnet mask. For example, a subnet mask of 255.255.255.0 (11111111.11111111.11111111.00000000 2) inverts to a wildcard mask of 0.0.0.255 (00000000.00000000.00000000.11111111 2). A wild card mask is a matching rule. [2] The rule for a wildcard mask is: 0 means that the equivalent bit must match
Therefore, with this mask, network addresses 192.0.2.1 through 192.0.2.255 (192.0.2.x) are processed. Subtract the normal mask from 255.255.255.255 in order to determine the ACL inverse mask. In this example, the inverse mask is determined for network address 198.51.100.0 with a normal mask of 255.255.255.0.
A special definition exists for the IP address 255.255.255.255. It is the broadcast address of the zero network or 0.0.0.0, which in Internet Protocol standards stands for this network, i.e. the local network. Transmission to this address is limited by definition, in that it is never forwarded by the routers connecting the local network to ...
255.255.255.255/32 255.255.255.255 1: Subnet Reserved for the "limited broadcast" destination address [1] IPv6 IPv6 assigns special uses or applications for various ...
Subnet masks are also expressed in dot-decimal notation like an IP address. For example, the prefix 198.51.100.0 / 24 would have the subnet mask 255.255.255.0. Traffic is exchanged between subnets through routers when the routing prefixes of the source address and the destination address differ. A router serves as a logical or physical boundary ...
If there are multiple routes with the same subnet mask, the route with the lowest metric is used. If there are multiple default routes, the metric is also used to determine which to use. If there are multiple routes with the same subnet mask and metric, the system may use equal-cost multi-path routing as a forwarding strategy.
Network mask in all networks: 255.255.255.0 (/24 in CIDR notation). If the routers do not use a routing protocol to discover which network each router is connected to, then the routing table of each router must be set up.
The term subnet mask is only used within IPv4. Both IP versions however use the CIDR concept and notation. In this, the IP address is followed by a slash and the number (in decimal) of bits used for the network part, also called the routing prefix. For example, an IPv4 address and its subnet mask may be 192.0.2.1 and 255.255.255.0, respectively.
Ad
related to: 255.255.255.255 mask