Search results
Results from the WOW.Com Content Network
A new measure, the imperial gallon, which replaced the many gallons in use, [Note 1] was defined as being the volume of 10 pounds of water at 62 °F (17 °C) which, after the authorized experiments, was found to be 277.274 cubic inches.
The wine gallon, which some sources relate to the volume occupied by eight medieval merchant pounds of wine, was at one time defined as the volume of a cylinder 6 inches deep and 7 inches in diameter, i.e. 6 in × (3 + 1 / 2 in) 2 × π ≈ 230.907 06 cubic inches.
In the standard system the conversion is that 1 gallon = 231 cubic inches and 1 inch = 2.54 cm, which makes a gallon = 3785.411784 millilitres exactly. For nutritional labeling on food packages in the US, the teaspoon is defined as exactly 5 ml, [22] giving 1 gallon = 3840 ml exactly. This chart uses the former.
The fluid ounce derives its name originally from being the volume of one ounce avoirdupois of water, [21] but in the US it is defined as 1 ⁄ 128 of a US gallon. Consequently, a fluid ounce of water weighs about 1.041 ounces avoirdupois.
1 imperial bushel = 8 imperial gallons = 4 imperial pecks = 36.368 72 litres: ≈ 8.25645 US dry gallons ≈ 9.60760 US fluid gallons ≈ 2 219.36 cubic inches: ≈ 1.284 35 cubic feet 1 US bushel [6] = 8 US dry gallons = 4 US pecks = 2 150.42 cubic inches = 1.244 46 cubic feet = 35.239 070 166 88 litres ≈ 9.3092 US fluid gallons ≈ 7.7515 ...
[a] Originally defined as the volume of 10 pounds (4.54 kg) of distilled water (under certain conditions), [b] then redefined by the Weights and Measures Act 1985 to be exactly 4.546 09 L (277.4 cu in), the imperial gallon is close in size to the old ale gallon.
The National Conference of Weights & Measurements (NCWM) has developed a standard unit of measurement for compressed natural gas, defined in the NIST Handbook 44 Appendix D as follows: "1 Gasoline [US] gallon equivalent (GGE) means 2.567 kg (5.660 lb) of natural gas." [23]
Some SI units of volume to scale and approximate corresponding mass of water. A litre is a cubic decimetre, which is the volume of a cube 10 centimetres × 10 centimetres × 10 centimetres (1 L ≡ 1 dm 3 ≡ 1000 cm 3). Hence 1 L ≡ 0.001 m 3 ≡ 1000 cm 3; and 1 m 3 (i.e. a cubic metre, which is the SI unit for volume) is exactly 1000 L.