enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Magnesium oxide wallboard - Wikipedia

   en.wikipedia.org/wiki/Magnesium_oxide_wallboard

   Magnesium oxide wallboard (10 mm thickness) Magnesium oxide, more commonly called magnesia, is a mineral that when used as part of a cement mixture and cast into thin cement panels under proper curing procedures and practices can be used in residential and commercial building construction.

3. Drywall - Wikipedia

   en.wikipedia.org/wiki/Drywall

   Lengths up to 16 feet (4.9 m) are common; the most common is 8 feet (2.4 m). Common thicknesses are 1 ⁄ 2 and 5 ⁄ 8 inch (13 and 16 mm); thicknesses of 1 ⁄ 4, 3 ⁄ 8, 3 ⁄ 4, and 1 inch (6, 10, 19, and 25 mm) are used in specific applications. In many parts of Canada, drywall is commonly referred to as Gyproc.

4. Plywood - Wikipedia

   en.wikipedia.org/wiki/Plywood

   The most common dimension is 1.2 by 2.4 metres (3 ft 11 in × 7 ft 10 in) or the slightly larger imperial dimension of 4 feet × 8 feet. Plies vary in thickness from 1.4 mm to 4.3 mm. The number of plies—which is always odd—depends on the thickness and grade of the sheet. Roofing can use the thinner 16-millimetre (5 ⁄ 8 in) plywood.

5. Gypsum block - Wikipedia

   en.wikipedia.org/wiki/Gypsum_block

   In the U.S. gypsum blocks were made in thicknesses of 2, 3, 4 and 6 in (51, 76, 102 and 152 mm). [2] In Europe they are available in thicknesses of 60 mm, 70 mm, 80 mm or 100 mm. In European residential buildings regularly 80 or 100 mm thick gypsum blocks are being used. For construction purposes especially two densities are important:

6. Cement board - Wikipedia

   en.wikipedia.org/wiki/Cement_board

   A cement board is a combination of cement and reinforcing fibers formed into sheets, of varying thickness that are typically used as a tile backing board. [1] Cement board can be nailed or screwed to wood or steel studs to create a substrate for vertical tile and attached horizontally to plywood for tile floors, kitchen counters and backsplashes.

7. BS 1088 - Wikipedia

   en.wikipedia.org/wiki/BS_1088

   Moisture Content-- BS 1088 plywood must have a moisture content between 6% and 14% when it leaves the factory. Finishing-- Boards will be sanded on both sides equally. Length & Width-- The length or width of a board produced as a standard size shall not be less than the specified size nor more than 6.3 mm (0.25") greater than the specified size.