Search results
Results from the WOW.Com Content Network
A separate cam on the camshaft (as seen in Fig. 5 and on the two-cylinder Johann-Weitzer-engine on the right) would activate the injection valve so the compressed air would then press the fuel into the combustion chamber. Before the injection valve opens, neither fuel nor compressed air can enter the combustion chamber. [16]
The term fuel injection is vague and comprises various distinct systems with fundamentally different functional principles. The only thing all fuel injection systems have in common is the absence of carburetion. There are two main functional principles of mixture formation systems for internal combustion engines: internal and external.
The first Bosch engine management system was the Motronic 1.0, which was introduced in the 1979 BMW 7 Series (E23) [8] This system was based on the existing Bosch Jetronic fuel injection system, to which control of the ignition system was added.
Advancements in fuel modelling—HCCI combustion is driven mainly by chemical kinetics rather than turbulent mixing or injection, reducing the complexity of simulating the chemistry, which results in fuel oxidation and emissions formation. This has led to increasing interest and development of chemical kinetics that describe hydrocarbon oxidation.
Common rail fuel system on a Volvo truck engine. In 1916 Vickers pioneered the use of mechanical common rail systems in G-class submarine engines. For every 90° of rotation, four plunger pumps allowed a constant injection pressure of 3,000 pounds per square inch (210 bar; 21 MPa), with fuel delivery to individual cylinders being shut off by valves in the injector lines. [1]
Early Lucas electronic diesel unit injector. A unit injector (UI) is a high-pressure integrated direct fuel injection system for diesel engines, combining the injector nozzle and the injection pump in a single component. The plunger pump used is usually driven by a shared camshaft. In a unit injector, the device is typically lubricated and ...
These valves are mounted on the outlet fittings of the fuel injection pump, one per cylinder injector. They are always mounted at the pump end of the pipes between the pump and injectors. The check valve aspect is a conical valve or 'mitre valve', [i] held against a matching conical seat by a spring. As these valves must work at high pressure ...
Better fuel distribution and better fuel charge inside the combustion chamber; During the injection process the fuel gets evaporated, cooling the cylinder chamber; Cooling effect of the pressurized fuel allows for use of a lower octane fuel leading to a cost savings for the end user; Higher compression ratios, which translates into more power