Search results
Results from the WOW.Com Content Network
Salinity in rivers, lakes, and the ocean is conceptually simple, but technically challenging to define and measure precisely. Conceptually the salinity is the quantity of dissolved salt content of the water. Salts are compounds like sodium chloride, magnesium sulfate, potassium nitrate, and sodium bicarbonate which dissolve into ions. The ...
At 100 °C (212 °F; 373 K), saturated sodium chloride brine is about 28% salt by weight. At 0 °C (32 °F; 273 K), brine can only hold about 26% salt. [ 3 ] At 20 °C one liter of water can dissolve about 357 grams of salt, a concentration of 26.3%.
The conversion of conductivity (in μS/cm) to the total dissolved solids (in mg/kg) depends on the chemical composition of the sample and can vary between 0.54 and 0.96. Typically, the conversion is done assuming that the solid is sodium chloride; 1 μS/cm is then equivalent to about 0.64 mg of NaCl per kg of water.
Referring to a common salt of fluoride, sodium fluoride (NaF), the lethal dose for most adult humans is estimated at 5 to 10 g (which is equivalent to 32 to 64 mg elemental fluoride/kg body weight). [ 2 ] [ 3 ] [ 4 ] Ingestion of fluoride can produce gastrointestinal discomfort at doses at least 15 to 20 times lower (0.2–0.3 mg/kg or 10 to 15 ...
Sodium hypochlorite can also be used for point-of-use disinfection of drinking water, [40] taking 0.2–2 mg of sodium hypochlorite per liter of water. [41] Dilute solutions (50 ppm to 1.5%) are found in disinfecting sprays and wipes used on hard surfaces. [42] [43]
For instance, if the ADI is based on data from humans the safety factor is usually 10 instead of 100. The ADI is usually given in mg per kg body weight. [5] The ADI is considered a safe intake level for a healthy adult of normal weight who consumes an average daily amount of the substance in question.
NaK containing 40% to 90% potassium by mass is liquid at room temperature.The eutectic mixture consists of 77% potassium and 23% sodium by mass (NaK-77), and it is a liquid from −12.6 to 785 °C (9.3 to 1,445.0 °F), and has a density of 0.866 g/cm 3 at 21 °C (70 °F) and 0.855 g/cm 3 at 100 °C (212 °F), making it less dense than water. [3]
The World Health Organization (WHO) recommends fluoride levels of 0.5–1.5 mg/L, depending on climate and other factors. [5] In the U.S., the guideline was proposed at 0.7 mg/L in 2011 (replacing 0.7–1.2 mg/L) and finalized in 2015. [6] [7] Bottled water often has unknown fluoride levels. [8] Tooth decay affects 60–90% of schoolchildren ...