Search results
Results from the WOW.Com Content Network
Later full-rigged ships split the topsail (and often the topgallant sail) for easier handling. They thus set two topsails (and possibly two topgallant sails) per mast. The lower topgallant sail is immediately above the upper topsail. The upper or only topgallant sail is set from the top of the topgallant mast. If there is a lower topgallant it ...
Crosstrees are the two horizontal spars at the upper ends of the topmasts of sailing ships that are used to anchor the shrouds from the topgallant mast. They may also be mounted at the upper end of the topgallant to anchor the shrouds from the royal mast (if fitted).
English: Stavros S Niarchos's main-topgallant yard refitted to the mast at sea after being brought down on deck for maintenance. Not all the lines are re-rigged yet; missing are the sheets for both the topgallant itself and the royal above it. The clewlines and buntlines are similarly not fitted, and the sail has not been bent on yet.
Boat deck: Especially on ships with sponsons, the deck area where lifeboats or the ship's gig are stored. Boiler deck: (river steamers) The passenger deck above the vessel's boilers. Bridge deck: (a) The deck area including the helm and navigation station, and where the Officer of the Deck/Watch will be found, also known as the conn.
Key: 1. Forestay 2. Shroud 3. (Spreaders) 4. Backstay 5. Inner forestay 6. Sidestay 7. (Boom) 8. Running backstays Standing rigging on a square-rigged vessel (illustrated left), which supports a mast comprising three steps: main, top, and topgallant (illustrated right). The shrouds support each section laterally and the stays support each, fore ...
For staysails between the foremast and the mainmast (from bottom to top): main, main-topmast, main-topgallant, and main-royal (...staysail). Staysails between other masts are similarly named. The mizzen sail (or "spanker") is a gaff-rigged, fore-and-aft sail, mounted on the after side of the mizzenmast. It was used to help tack the vessel. [8] [9]
This is not the masthead "crow's nest" of the popular imagination – above the mainmast (for example) is the main-topmast, main-topgallant-mast and main-royal-mast, so that the top is actually about 1/4 to 1/3 of the way up the mast as a whole. The main purpose of the top is to anchor the shrouds of the topmast that extends above it.
On a square rigged vessel, a topsail is a typically trapezoidal shaped sail rigged above the course sail and below the topgallant sail where carried, on any mast (i.e., a fully rigged ship would have a foremast topsail, a mainmast topsail, and a mizzen topsail). A full rigged ship will have either single or double (i.e., "split" upper and lower ...