Search results
Results from the WOW.Com Content Network
The gas-lift mandrel is a device installed in the tubing string of a gas-lift well onto which or into which a gas-lift valve is fitted. There are two common types of mandrels. In a conventional gas-lift mandrel, a gas-lift valve is installed as the tubing is placed in the well. Thus, to replace or repair the valve, the tubing string must be pulled.
This calculation is at sea level at 0 °C. For higher altitudes, or higher temperatures, the amount of lift will decrease proportionally to the air density, but the ratio of the lifting capability of hydrogen to that of helium will remain the same. This calculation does not include the mass of the envelope need to hold the lifting gas.
Petroleum production engineers design and select subsurface equipment to produce oil and gas well fluids. [1] They often are degreed as petroleum engineers, although they may come from other technical disciplines (e.g., mechanical engineering, chemical engineering, physicist) and subsequently be trained by an oil and gas company.
Maximum Allowable Operating Pressure (MAOP) is a pressure limit set, usually by a government body, which applies to compressed gas pressure vessels, pipelines, and storage tanks. For pipelines, this value is derived from Barlow's Formula , which takes into account wall thickness, diameter, allowable stress (which is a function of the material ...
In engineering, a factor of safety (FoS) or safety factor (SF) expresses how much stronger a system is than it needs to be for an intended load.Safety factors are often calculated using detailed analysis because comprehensive testing is impractical on many projects, such as bridges and buildings, but the structure's ability to carry a load must be determined to a reasonable accuracy.
Gas networks simulation or gas pipeline simulation is a process of defining the mathematical model of gas transmission and gas distribution systems, which are usually composed of highly integrated pipe networks operating over a wide range of pressures. Simulation allows to predict the behaviour of gas network systems under different conditions ...
Gas initially in place (GIIP) or original gas in place (OGIP) denote the total estimated quantity (volume) of natural gas contained in a "subsurface" asset prior to extraction . [ 1 ] Gas Initially In Place = Gross Rock Volume * Net/Gross * Porosity * average initial Gas Saturation / Formation Volume Factor [ 2 ]
However, while it does generate lift, it also generates a large amount of drag. [8] Since even a flat plate can generate lift, a significant factor in foil design is the minimization of drag. An example of this is the rudder of a boat or aircraft. When designing a rudder a key design factor is the minimization of drag in its neutral position ...