Ad
related to: full plate armor 3.5 ton
Search results
Results from the WOW.Com Content Network
In the first, hammering, large lumps of iron of scrap or puddled iron were heated to welding temperature and placed under heavy steel hammers. Repeated blows welded these lumps into one solid plate and shaped it to the required form and dimensions. Hammered iron plate was the armour used in the earliest ironclad vessels, including HMS Warrior ...
The hull of the tank was made up of two parts: The front half was a long rounded casting of steel homogeneous armor, it was 4 inches (101.6 mm) thick and angled at 60 degrees, while the rear was welded steel armor plate. The two halves were welded together in the center.
Steel breastplate, or Stalnoi Nagrudnik (Russian: Стальной нагрудник) is a type of body armor similar to a cuirass developed by the Red Army in World War II. The native Cyrillic abbreviation for the vest was "СН", the Cyrillic letters Es and En. It consisted of two pressed steel plates that protected the front torso and groin.
Harvey armor used a single plate of steel, but re-introduced the benefits of compound armor. The front surface was converted to high carbon steel by "cementing". In this process, the steel plate would be covered with charcoal and heated to approximately 1200 degrees Celsius for two to three weeks. The process increased the carbon content at the ...
The plates can be made of any material and are designed to be retrofitted to an AFV to withstand weapons that can penetrate the original armour of the vehicle. [ 17 ] [ 18 ] An advantage of appliqué armour is the possibility to tailor a vehicle's protection level to a specific threat scenario.
The M35 2½-ton cargo truck is a long-lived 2½-ton 6×6 cargo truck initially used by the United States Army and subsequently utilized by many nations around the world. Over time it evolved into a family of specialized vehicles. It inherited the nickname "Deuce and a Half" from an older 2½-ton truck, the World War II GMC CCKW.
The best result was achieved by utilizing a 20 millimetres (0.79 in) thick MEXAS armour panel on top of a 7.3 millimetres (0.29 in) HHA plate fitted with a 10 millimetres (0.39 in) liner on the interior — a mass efficiency of 3.5; however the higher thickness decreased the thickness efficiency to 0.8 compared to the other tested armour layouts.
SAPI plates meant for body armor come in front and back plates which are identical, and smaller side plates. The front and back plates come in five sizes. Their dimensions are the following: [1] [13] Front and back SAPI plates: Extra Small - 1.27 kg (2.8 lb) | 184 x 292 mm (7¼ x 11½ in) Small - 1.59 kg (3.5 lb) | 222 x 298 mm (8¾ x 11¾ in)
Ad
related to: full plate armor 3.5 ton