Search results
Results from the WOW.Com Content Network
Figure 1 – Essential Connector Parts for Bent Pin Analysis. In most pairs of mating connectors, one connector is fitted with an array of socket contacts and the other connector has a corresponding array of pin (or other shaped) contacts, as illustrated in Figure 1. These are sometimes called female and male contacts.
A Vertebrae Bend Restrictor (VBR) is used in the oil and gas industry as part of offshore deep sea drilling operations. It is designed to prevent damage to an umbilical cable from overbending. It offsets the action of applied loads which could kink or buckle the internal conduits of an umbilical, cable, flexible riser pipe or MUX line.
End-Connector Elbow 90°, F/F & F/M Elbow 45°, F/F & F/M Bend 15°, 45°, 75° M/M Coupling Coupling Long Tee Elbow 90° Male Coupling Bend 90° Male Thread Tee Male Union Male Coupling Male Straight Connector Elbow 90° Female Coupling Double Tap Connector 90/90 with Female Thread Elbow 90° Female Adapter Coupling Female Straight Connector
A banjo fitting is actually called a hose connecting bolt, or internally relieved bolt, and a spherical union for fluid transfer. See DIN 7643. It is typically used to connect a fluid line to a rigid, internally threaded hydraulic component.
A cable protection system (CPS) protects subsea power cables against various factors that could reduce the cable's lifetime, when entering an offshore structure.. When a subsea power cable is laid, there is an area where the cable can be subjected to increased dynamic forces the cable is not necessarily designed to withstand over its lifetime.
A hose coupling is a connector on the end of a hose to connect (or couple) it with another hose or with a tap or a hose appliance, such as an irrigation sprinkler. It is usually made of steel , brass , stainless steel , aluminium or plastic .
Street elbows are available with bend angles of 90°, 45°, and 22.5°. They can be used in many plumbing applications, including water supply, drainage, sewers, vents, central vacuum systems, compressed air and gas lines, heating and air conditioning, sump pump drains, and other locations where plumbing fittings would be used to join sections of pipe.
From a technical point of view, this precursor of today's expansion joints is a large, pressure-tight flexible metal hose with a defined, restricted freedom of movement. In the 1930s, the 'metal hose' or 'flexible metal tube' principle was replaced by the metal bellows as the central functional element. This design principle – metal bellows ...