Search results
Results from the WOW.Com Content Network
The Hyundai Beta engines are 1.6 L to 2.0 L I4 built in Ulsan, South Korea.. All Beta engines are dual overhead camshaft valvetrain design.The Beta engine uses a direct-acting overhead cam valvetrain arrangement which places the camshaft in the cylinder head above the pistons and combustion chamber and operates the valve tappets/lifters directly.
Roto's disadvantage was the 2-3 range or 1-2 gear change because it is not only a huge ratio jump from 2-3 range or 1-2 shift from 2.93 to 1.56, but also there is no fluid slippage in the coupling because the coupling drains (four-tenths of a second) to engage or apply the front clutch and so the trans goes to full mechanical connection.
Locomotives classified 4-4-2 under the Whyte notation of locomotive axle arrangements. The equivalent UIC classification of locomotive axle arrangements is 2B1 or 2'B1 . Subcategories
The 2.4L version is an inline 4-cylinder engine that carries a bore of 88.0 mm, stroke of 97.0 mm and a 10.5:1 compression ratio; the engine dry weight is 146 kg (322 lb) and it makes 165 PS (121 kW; 163 hp) at 5,800 rpm and 22.3–23 kg⋅m (161–166 lb⋅ft; 219–226 N⋅m) of torque at 4,250 rpm. [2] Applications
The Nu 2.0 L (1,999 cc) version of this engine features the same 81 mm (3.19 in) bore but with a longer stroke of 97 mm (3.8 in). First revision of the G4NA engine makes 166 PS (122 kW; 164 hp) at 6,500 rpm and 20.5 kg⋅m (148 lb⋅ft; 201 N⋅m) at 4,800 rpm while later revisions produce 152–156 PS (112–115 kW; 150–154 hp) at 6,200 rpm and 19.6–19.9 kg⋅m (142–144 lb⋅ft; 192 ...
CHT engine in a Fiat Croma. One version was the CHT (for "Controlled High Turbulence"). This version was mainly used in the first generation Fiat Croma and used a special head and intake with auxiliary intake ducts to provide a better fuel and gas mixture under low or partial acceleration. [1]
A drive shaft system weighs more than a chain system, usually 0.5–1 kg (1–2 lb) heavier. Many of the advantages claimed by drive shaft's proponents can be achieved on a chain-driven bicycle, such as covering the chain and sprockets. Use of lightweight derailleur gears with a high number of ratios is impossible, although hub gears can be used.
Toyota Motor Corporation's W family is a family of RWD/4WD transmissions built by Aisin.Physically, these transmissions have much in common (like the bell housing-to-body bolt pattern) with other Aisin-built transmissions, like the Jeep AX-5 and the Toyota G-series.