Search results
Results from the WOW.Com Content Network
Firearm muzzle velocities range from approximately 120 m/s (390 ft/s) to 370 m/s (1,200 ft/s) in black powder muskets, [3] to more than 1,200 m/s (3,900 ft/s) [4] in modern rifles with high-velocity cartridges such as the .220 Swift and .204 Ruger, all the way to 1,700 m/s (5,600 ft/s) [5] for tank guns firing kinetic energy penetrator ammunition.
A guide to the recoil from the cartridge, and an indicator of bullet penetration potential. The .30-06 Springfield (at 2.064 lbf-s) is considered the upper limit for tolerable recoil for inexperienced rifle shooters. [2] Chg: Propellant charge, in grains; Dia: Bullet diameter, in inches; BC: Ballistic coefficient, G1 model; L: Case length (mm)
Subsonic loads for 9×19mm Parabellum commonly use 9.5 g (147 gr) bullets at velocities of 300 m/s (980 ft/s). For these ammunition loads, balancing bullet weight and velocity are required to ensure that the ammunition will still reliably cycle semi-automatic firearms. Subsonic ammunition with normal bullet weights often fails to function ...
Example of a ballistic table for a given 7.62×51mm NATO load. Bullet drop and wind drift are shown both in mrad and MOA.. A ballistic table or ballistic chart, also known as the data of previous engagements (DOPE) chart, is a reference data chart used in long-range shooting to predict the trajectory of a projectile and compensate for physical effects of gravity and wind drift, in order to ...
.17 PMC/Aguila.17 Hornady Mach 2.17 Hornady Magnum Rimfire.17 Winchester Super Magnum.22 BB Cap.22 CB Cap.22 Short.22 Long.22 Long Rifle.22 Extra Long
In the open division, IPSC has a lower power factor requirement of 160 kgr·ft/s for major, while the other IPSC handgun divisions require a power factor of 170 kgr·ft/s for major. Open and revolver are also the only divisions that allows major scoring with a 9 mm bullet diameter (the other handgun divisions require a 10 mm bullet diameter).
This worked well for low-speed bullets, fired at velocities of less than 450 m/s (1,475 ft/s). For slightly higher-speed bullets fired in modern firearms, a harder alloy of lead and tin or typesetter's lead (used to mold linotype) works very well. For even higher-speed bullet use, jacketed lead bullets are used.
Claimed by Weatherby to be the fastest 6.5mm cartridge available. [4] Designed in a similar fashion as other Weatherby cartridges, it has a large-for-caliber case capacity, resulting in high velocities. When bullets with high ballistic coefficients are used, trajectories are extremely flat, allowing the projectile to retain a significant amount ...